Hypex NCore 1200


Greetings,
I plan to purchase the class D NCore 1200 amps.
Has anyone compared these amps against those class A or A/B amps such as McIntosh MC501, Passlab XA160.5 or Lamm 1.2!?
Thanks
primare_cd31
Primare_cd31. I must say that what you are experiencing with the TRL amps is not what I have seen from the Veritas. That said the Veritas, as Guido has observed, do go through their own break-in period. Perhaps TRL does no pre break-in before they ship them.

By the way keep them ON ALL the time. They sound their best fully warmed up. They take a few hours to a day to sound their best after they are turned off. They use very little electric at idle.

That said I have not heard the Veritas do what you are hearing. And the Mola-Mola and Acoustic Imagery amps also.

Try lifting the ground on the amps by using a cheater plug and see if that works and let use know.

As an aside use some vibration control, I like Stillpoints a lot, and try some different power cords.

I have chatted with Paul Weitzel at TRL.... the TRL600 monoblock amp is indeed based on Ncore NC1200 modules. Each amp is housed in a half-size chassis measuring 7.5" x 4" x 15X. Rather than the usual 15A IEC connectors, TRL600 uses a Neutrik latchable power connector. The device is supplied with a custom power cord similar to an FIM cord. A conversion adapter is apparently also supplied for usage with 3rd party cords terminated with IEC connectors. There is one set of Cardas binding posts. The XLR input connector is by Neutrik, and the RCA input connector is by Cardas. The amp is meant to be always on when plugged into AC... As such, there is no on/off/standby switch. List price is $9,000. For further information, you may contact Paul at 509-989-4437; email: info@tuberesearchlabs.com.

Saluti, Guido
Guido, That is great and thanks for the info.

I think the reason the room sounded just OK (again not a bad thing) when I heard it at the NY Audio Show this year was that they kept on switching the two different amps in and out. In my opinion a dumb thing to do sound wise. Even many Class A and A/B amps need time to "settle" to sound their best.
I've had HRS Nimbus/ Spacer under the amps with both top and bottom Nimbus.
I was in shock after removing the top Nimbus so the spacer contacts the bottom of the amp while the Nimbus isolate the Spacer and the hardwood amp platform. The sound is so so much better than my MC501 amps now. Really don't understand how these changes made a huge difference!
It seems 2 Nimbus caused too much damping. This has made the sound more heavy!