2. speakers
  3. 1375071125

Speaker placement in strangely shaped "room"?

Hi, I'm planning on placing my speakers on 2.5-3 feet speaker stands in a "room" that's shown in the following diagram.

http://s21.postimg.org/91t5aob6f/Drawing1.jpg

The dotted line means that the wall stops about 3.5 feet off the floor. Right now, I'm wavering between Option 1, which is to place one speaker in Corner A and the other in Junction B, or Option 2, which is to place one speaker in Junction B, and the other in Junction C. If I were to go with Option 2 (which would fit best with the space I have), one of the speakers would be placed near a wall, while the other would be in mid-air. Would that be detrimental to the sound produced?

Thank you so much. In case it's relevant, the speakers are Wharfedale evo2-8's.
toxicwaterfront
clio09
2,978 posts
 
Kind of hard to tell how much space there is to work with since no distances are provided. One thing I would look into is a diagonal set up where you could leverage the solid wall space between the door and corner A and corner A and junction B.

What kind of room is this anyway and why does the wall stop short of the floor?
tom6897's avatar
tom6897
1,029 posts
 
You really need to provide dimensions, we are not mind readers.

For ex. If you have 15' wide by 25' long you wouldn't need to worry about corner placement because you could use the long wall method.
tgrisham
1,179 posts
 
No question about it. There is no formula for odd shaped rooms. Or much for any other rooms in my opinion. Research the Sumiko Master Set method. The speakers will "play the room". I've never found a better starting point. It was developed for hotel and meeting rooms for hi Fi conventions. Imagine how hard that is. If you spend the time and are careful you will be rewarded. Forget the tape measures, laser pointers, RS meters, hand clapping, and calculators.
More to discover