2. analog
  3. 1374770339

Scraping sound

I'm getting a scraping sound. This noise sounds like when the record is over & the stylus scratches the label. The scraping sound is most pronounced between cuts but can be heard underlying the music.

Where do I begin looking to fix this?

The setup: VPI Scoutmaster & arm with Soundsmith Zephyr

Thanks
maxh
stringreen's avatar
stringreen
5,112 posts
 
The back end has to be a bit tail up
bifwynne
2,069 posts
 
String.... I thought the VTA for the Delos should be parallel (90 degrees) to the record.
stringreen's avatar
stringreen
5,112 posts
 
Bif... Delos? I read this as he had a Zephyr???
bill_k
671 posts
 
Zd542, my advise was to check the main platter bearing for grease, not the tonearm's unipivot spike bearing. The later has no grease.
bifwynne
2,069 posts
 
String... Both the OP and I own the Zephyr. The OP's concern related to his Zephyr. My post is about my Delos, which seems to also produce a groove scrapping sound.

Your comment suggested that I lift the back-end of the Delos. I asked whether this is the optimal way to mount the Delos because I recall reading that the Delos should be mounted parallel to platter.

So to sum it up, both the OP and I are talking about similar problems, but different cartridges. I did, However, mention that my Zephyr is on its way to SS for an inspection and re-tip of necessary.
More to discover