1A fuse instead of 1/2A fuse: any problem?

Agree very bad idea. If the fuse protection is needed, and you have DOUBLED to power that can pass before breaking the circuit, you have effectively ruined that ability to protect.

Actually you have QUADRUPLED the power that can pass since power is proportional to the square of the current.

Fuses DON'T blow at their rating. The rating is the current they will carry forever (almost). As current increases over the rating, the time until the fuse blows decreases. A half amp fuse will, depending on type, blow quite quickly at one amp, whereas the one amp fuse will not blow.

Put a 2a or a piece of wire in there, then you won't have to worry about those wimpy shutdowns.

Oh, and I should have added - keep a fire extingusher handy