Power Plant Premier making sound worse?


I have 2 new dedicated lines installed using Telsaplex outlets. I have 3 Kubala-sosna Emotion PCs feeding an Ayre V5Xe, Ayre K5xe and Ayre C7xe. They were all plugged into the PPP, a Lossless PC feeds the PPP from one of the dedicated lines. I noticed a buzzing sound that went away from the PPP so out of concern I shut off the PPP and fed all the Ayre stuff to the outlets directly (amp to one outlet, preamp and CD player to other) via all KS PCs. It sounds much better, more texture and detail. I am very surprised so I am not sure if there is an issue with the PPP or should I just get rid of it? Please comment
solecky
Well, those brutal nickel plated outlets on the PPP may have something to do with it.
As Solecky said, experiment. There's no universal rule of application with these things. It is very common for only front end gear to be power conditioned. Many, many listeners prefer their amps directly connected to the wall. I've also heard from more than a few that didn't like conditioning at all after they got dedicated lines.
I tried the LessLoss PC from the wall to my PPP and did not like it. I preferred the PS Audio cords in that position. Different story using the Lessloss from the PPP to my preamp. Liked it a lot.

Similarly using a PS Audio Duet, I did not like the LessLoss from the wall to the Duet as much as a PS Audio cord but liked the LessLoss from the Duet to my amps.

I run a dedicated line to a single outlet so I need the Duet and PPP or something similar.
The PPP will put out 1500 watts contiunous and if the componenets draw more than that or close to it the PPP will shift to passing current directly from the wall or not produce the quality of sound it usually does, respectively.

I use mine with a dedicated 20 amp line for my front end components and a smaller HT amp and it sounds great. My main amp is too much for it and I use a Hyra for it.

There were several generations of the PPP with the latest souding the best and be identified with a 'F8' somewhere in the serial number. The prior generation of F7 isn't bad but the F8 production runs that began in August 2008 have the best parts in them.

Should you want more information feel free to email me.
I suggest calling PS Audio and discussing it with them, describing all of the details, as you did in your post. They are one of the most helpful and customer oriented companies around, and are usually willing to do just about anything to help you fix the problem.

From some of the above posts it sounds like your problem may be from incompatibility with some of your power cords, etc. Or a slight chance of a defect in the PPP, although not likely.

Also try some of the different settings of the PPP, accessed from the remote, including having all of your components turned on (not running) and activate the "clean wave" function. This will "degauss" all of the connected magnetics.

I have a PPP plugged into a dedicated 20A circuit, and use a variety of power cords, depending on the components (JPS Labs Digital AC for SACD player, etc.) and the difference in sound quality after hooking up the PPP is amazing.