Jejaudio, Are you talking about ground wire that is part of a power cord? Or as a stand alone wire used to ground a component chassis to earth ground? In either case, what were the sonic differences for your two versions?
Do better ingredients make a better Ground Wire?
We have all heard the slogan "Better ingredients better Pizza". If this is true with Pizza, how about applying this Principal to a DIY Ground wire I pondered. So I set off on a journey to find out if using better ingredients (wire) would make a better ground cable. My finding of course only apply to my system in my listening room using my ears (my wife and my Beagle dog don't count). But they heard the difference as well. To say this was a short trip is an understatement. To say that the two versions I made more than held there own is an even BIGGER understatement. One version uses solid core Silver wire. The other version uses a silver & Palladium mix. I made 4 of each kind, both versions terminated using a pure 8 awg copper spade. Do better ingredients make a better Ground wire. In my system, a very understated YES!!!
- ...
- 67 posts total
Hi, I'm talking about a DIY version of the Audio Prism Ground Control. I own 4 of these with the spade ends. I have two on my speaker negative post, and the other two are on my Classe S-700 power amp's negative post. I just made my own Diy version of the 4 Audio Prism Ground Control spades. I made 4 with solid core silver wire. Each one terminated on a pure copper spade. The DIY solid silver ground spades are faster than the Audio Prism. Have more impact slam, PRAT, details are better fleshed out than the Audio Prism, but the ease and flow is still there, just bolder, brighter, deeper, blacker. Now the silver & palladium mix spades have everything the solid silver have, but have slightly darker tone. Voices come out of blackness that's rich ,full, detailed and smooth. The Palladium & silver spades are very impressive. But the best combo has been the Palladium & Silver on my amp negative post, and the solid silver on my speaker negative post. |
People..... my understanding of this thing is that the other end of the wire is not connected to earth ground.(AKA, the safety equipment grounding conductor.) It is not connected to anything. Example of, I believe. http://www.audioasylum.com/audio/cables/messages/14/146811.html |
- 67 posts total