Can I hook up two amps to the same speaker?

This electrical stuff is a bit intimadating. Would it be possible to find an audio repair shop to construct the two switch boxes with binding posts, etc. for me. Then all I would have to do is hook up the speaker cables? I could call Zu and get a few feet of their Ibis cable. Would that be cool? Maybe a bit more expensive, but less heatburn.

You can get an automatic switch from someone like Niles Audio for this exact purpose.

Rwwear, very cool. Looks just like what I need. I probably could rewire the interior (or have it done) with Ibis cable. That would keep the continuity/wire DNA in sync, don't you thin? One or two of those switch boxes? I suppose the binding posts are on the back? thanks for the tip. warren

You should be a bit intimidated. If you do this wrong, you risk serious damage to your amps. In addition, to what was said above, I've heard that some tube amps do not like having no load on the outputs while the amp is on. That would be a problem if you switched over to the transistor amp while the tube amp was still on. Yes, you might be able to find a shop to make up a switchbox with what you need. Or, you might consider putting dual banana recepticles on the end of the speaker wires and bananas on the end of the amp wires, put the ends in a handy place and hook them up like an old-time telephone switchboard operator. If you describe why you want to do this, there might be other and better solutions.

The reason why really doesn't really matter, but there is a major factor which nixes this idea. The bottom line is that the swithch box, no matter how you look at it, is a pothole on a perfect highway. I believe regarless of the connections and workmanship there will be inherent factors that have a slight, but, deleterious effect of the signal. Total isolation is impossibe. I'm going to let this idea go. The reason btw, was since I have an SET amp, and my speakers, though 101db, can handle up to 500 watts per. I just wanted the ability, on the rare ocassion I want my ears to bleed..lol...to pump in 100 or 200 watts. I have heard what these babies can do with a 100 watts per and would like to have that capability. Look, I can always have the speaker spades right next to the speakers and unhook and rehook. A bit of a pain in the ass. something I know I would not be into. My fellow audiophools, thanks for your tips. peace, warren