atmasphere
Responses from atmasphere
| Atma Sphere S30 amp FWIW the reports we have say that the S-30 drives the VSM easily, as well as the TSM. | |
| Atma-sphere 3.0 to 3.1 We've got a lot of people that offer their favorites there, personally I don't play with the NOS tubes that much- I buy LPs and CDs instead :)The Ken-Rad and Sylvania metal-based chrome-dome get the highest marks in that location, followed by the ... | |
| Power output of tube amps compared to solid states Unsound, sounds like right here is the point where you are going to have to try this out yourself rather than relying on other's input. I've only been offering the 'why' behind the experience. | |
| Do any amps have 6 ohm taps for 6 ohm impedance? Actually you should not loose very much power at all, perhaps a few watts if using the 6 ohm tap. As mentioned earlier, try it and see what you like. I think you will find ts not that critical. | |
| High Efficiency Speakers Your top 3 or more Tvad, we are not so strict about the loading on the M-60. I've seen it work fine with speakers that dip to 4 ohms at crossover points, IMO its always something that you try and see how it works. But Thom has had his M-60s for well over a year and ... | |
| Reel to Reel We've done tape EQ for a few customers, so they could run direct from the head to the preamp. So far it seems as if that works quite well. Its nice if you can get a new tape EQ unit, as often 3-motor transports may not need that much work, but the... | |
| Tube Friendly Speakers - Down to 30Hz - $3000? Hey Duke, there is no way they could sound like that if the speaker didn't have what it takes! | |
| High Efficiency Speakers Your top 3 or more Mapman, although I prefer OTLs myself :) if I had a set of field-coil powered Classic Audio Loudspeakers (which are about 99-100 db, about 3 db more than their Alnico versions), I would not hesitate to try out one of the DeHavallind SETs and treat... | |
| Atma-sphere 3.0 to 3.1 Pubul57, thanks, I'm glad you like it. The 3.1 update reduces distortion at full power by about 90%; that translates to additional transparency with smoother delivery- its amazing how that can affect things, even in the bass, although a string bas... | |
| Paranoid on Tube Amp Install Speakers cannot cause any amp to catch fire. I've been in the amp business in one form or another (worked in serveal service centers and then in manufacturing) for 37 years. So far I have yet to see an amplifier catch fire, tube or solid state. Th... | |
| The pivoted arm experiment is over Lewm, I've not heard the Trans-Fi yet but I have customers that really like it. | |
| Tube Friendly Speakers - Down to 30Hz - $3000? Duke at Audiokinesis has introduced a new speaker called the Cloud Chaser that looks well-suited and I understand its closer to $2500/pair. Duke always makes very competent, easy to drive speakers that perform well above their price points so this... | |
| High Efficiency Speakers Your top 3 or more Most high efficiency speakers have fairly tight tolerances in the voice coil gap which makes them very reactive. The back EMF they present to amplifiers that use a lot of feedback is enough to confound the amplifier, as the feedback signal thus co... | |
| The pivoted arm experiment is over Mepearson, excellent work. I think you have shown what I have felt for a long time, which is that time has passed the FR arms by. I do not agree otherwise that this test is conclusive regarding your other thread, but if what you wrote is indeed wh... | |
| Reel to Reel A tape machine that is a bit of a sleeper is the Magnacord. They were made in 7 1/2 and 15 ips versions, although seems to me the 7 1/2 ips (with 3 3/4 as the slow speed) is a bit harder to find. There was the 724 and 1024; like any older machine ... |