dangcaonguyen
Responses from dangcaonguyen
Isolated Ground causes ground hum. I put my system back to normal. Thank you for talking me out of the dangerous isolated ground gentlemen.Calvin | |
Isolated Ground causes ground hum. Thank you everyone,I will remove the isolated ground system and put my music system back as before.One last question:Do I have to remove all the ground rods I already planted is in the ground? Is there any issue if I keep them there? Its kind of h... | |
Isolated Ground causes ground hum. Hi everyone,The humming problem is solved. I want to report back on what I have done to it.1) Connected the ground to the conduit metal outlet box.2) Connected the Isolated Ground (from my ground post) to the ground pin of the IGR receptacle.3) Th... | |
Isolated Ground causes ground hum. Thank you Jim,Calvin | |
Isolated Ground causes ground hum. @jea48 Thank you for the paper, it helps a lot. What do you think about the use of Isolated Ground Receptacle in this case.Thanks | |
Isolated Ground causes ground hum. I figured out where the problem is. It is on the Conrad Johnson amplifier. When I plugged it into the outlet out of my dedicated line network, or when I used the cheat plug, the hum was gone.Now, anyone has any idea of how to fix it will be much a... | |
Isolated Ground causes ground hum. @erik_squires Thank you,and that was what I did. My outlet is still keeping as normal, 1 ot, 1 neutral, and 1 ground. I only added the extra isolated ground bond the the chassis of the preamp. Is it the same as I bond it to the common ground of th... | |
Isolated Ground causes ground hum. When i touched that wire to the ground post on the preamp, hum occurred. Thanks | |
Isolated Ground causes ground hum. I hammered three copper rods under the ground then linked them together with a solid 4 awg copper wire and through the exterior wall into my music room. | |
Isolated Ground causes ground hum. I only connected it to the ground post on my Shindo Aurieges preamp. | |
My old wavelength audio DAC is still usable @anwar thanks for the link.I will read it several more times to get better understanding the subject. | |
My old wavelength audio DAC is still usable @jond there might be the way, I will find out.@erik_squires the digital out on 3. I will find the way to check it somehow. If it was not MQA, then it should be 24/96, the sound I heard should be the same as the cd format. No it sounds much beter, ... | |
My old wavelength audio DAC is still usable @jond @digepix I listened the same song in both formats MQA and CD (24/96 I guess). 1. MQA directly from RCA out of Node2 to CD in of my preamp.2. 24/96 from Digital out of Node2 to Wavelength and to cd in of my pre.3. MQA from Digital out of Node... | |
Otari MTR-10 MKII Can the well maintenant MTR10 play the Tape Project tapes well? How does it compare to the famous Studers or Ampex? Thanks again. | |
Otari MTR-10 MKII Which link please? |