geek101
Responses from geek101
| Right channel louder, BAT VK-P10SE SuperPak with Ortofon 2M Bronze(MM) @dgarretson I swapped the smaller tubes left to right and it sounds ok. Why did I have to swap to fix this?. | |
| Right channel louder, BAT VK-P10SE SuperPak with Ortofon 2M Bronze(MM) @dgarretson There are two rows of tubes and two in between the rows (somewhat). What exactly should I swap. I had to set S2 "high" for volume to be reasonable. Still the same problem. | |
| Right channel louder, BAT VK-P10SE SuperPak with Ortofon 2M Bronze(MM) @try1256 what is the trim pot? | |
| Legacy Aeris owners which amp do you use and why? @mtrot, Thanks for the fantastic suggestion. Krell FPB-300cx and FPB-200c have a lot of class A power. Used ones are in the affordable range. Thanks again. | |
| Help me spec n class A AMP, power calculation 85dB @ 1W @ 1metre Yes a used M800 seems great, there are concerns with heat issues. I think an SS that can go up-to 100 watts class A and is reasonably priced is Coda 15.5. | |
| Line Magnetic 508ia and the Elusive 805 Tube Are there any measurements published for this amp when it is driven to peak i.e close to 48 Watts?. Anyone here have noticed problems when driven with speakers that are 92 dB efficient?. | |
| Legacy Aeris owners which amp do you use and why? @mckinneymike, Usually a dealer deals with few vendors. And no one I have talked to is interested in loaning for testing. | |
| Legacy Aeris owners which amp do you use and why? @audiotroy, I have listened to Aeris at RMAF 2018 and bought them. They are on the way along with Wavelet. The reason I got them because of how good they sounded compared to others and I believe in good engineering. Regarding loudness I play at 85... | |
| Legacy Aeris owners which amp do you use and why? @audiotroy Thanks but I have cost constraints. I would like to refer to this: https://parttimeaudiophile.com/2012/04/03/speaker-sensitivity-dynamic-range-and-amplifier-output/Seems like sitting at 3 meters all I need is 12wpc for 94 db efficient s... | |
| Legacy Aeris owners which amp do you use and why? I heard that but don't listening levels matter?. I mean if they say 500w max that does not mean we will need 500w for normal listening at 4 feet do we?. Also the amp does not need to power lower frequencies. | |
| Help me design for both music and TV around Legacy Audio's Wavelet + Aeris Humm Wavelet does take analog inputs. Would it be possible to send the output from AVR to wavelet for correction and then send it back to AVR?. Does this work? | |
| On the fence about Vinyl need a good phono stage for A/B testing @luxmancl38, Thank you I left a voice mail.Does AudioTechnica ART9 be a worthy cart for BAT VK-P10SE SuperPak and or for Luxman CL38U-SE ?.thanks | |
| On the fence about Vinyl need a good phono stage for A/B testing I went and got myself an used BAT VK-P10SE SuperPak. Going to use the saved coin to upgrade the cartridge and get some good vinyl!. Down the line I plan to get the Luxman CL38U-SE / EQ-500 and do some A/B testing with a good cartridge and see if ... | |
| On the fence about Vinyl need a good phono stage for A/B testing @luxmancl38, Where can I find Luxman CL38U-SE ?. I am only able to find Luxman CL38uC ?. | |
| On the fence about Vinyl need a good phono stage for A/B testing audiofun, Thank you. This does put things into perspective for me. I appreciate it :). |