gyneguy225
Responses from gyneguy225
| MQA is Legit! My vote is for MQA as I hear an improvement over redbook on some but not all recordings. My MQA source is exclusively Tidal thru PSA DSD and bridge II. I wouldn't give up Tidal or Roon for anything. I've discovered so much music with these servic... | |
| Like the new look to audiogon ? I used to enjoy this site. -Not any more | |
| Eminent Technology ET-2 Tonearm Owners Does anyone else use a wall mounted (to the studs of a weight bearing wall) shelf to mount their table? My homebrew turntable shelf consists of heavy duty L brackets from Home Depot and a 1 1/2 inch thick birch plywood shelf. You could stand on my... | |
| Eminent Technology ET-2 Tonearm Owners The photo on Bruce's website shows the ET-2 mounted on a SOTA table with sprung suspension. Over the years, I've heard that this can be a nightmare to keep in balance, but I have had no problem with it, and Bruce said I was just fine with the SOTA... | |
| Eminent Technology ET-2 Tonearm Owners Thanks for the clarification. I was wrong.John | |
| Eminent Technology ET-2 Tonearm Owners That ET2.5 on Ebay looks like an ET2.0 to me. Just look at the owner's manual. Current bid is $600.Buyer beware.-John | |
| Eminent Technology ET-2 Tonearm Owners I'm glad that I'm happy enough with my ET2.0. It only took me 20 years to get it setup right. I'm not about to start all over again!-John | |
| Man this is frustrating I'm using Audioquest Water RCA cables with the DBS system from tonearm to phono preamp. Would these cables still benefit from burn in on my old "Duotech cable enhancer"? | |
| Eminent Technology ET-2 Tonearm Owners It's funny how that little styrene I-beam I bought at the hobby shop 10 years ago works pretty well. I tried using less weight on the I-beam further out, but when I moved the arm in or out, the I-beam waved back and forth like a dog wagging its ta... | |
| Eminent Technology ET-2 Tonearm Owners Hey Harry,I'm glad you appreciate the tweak, and glad I could contribute something to this thread.John | |
| Eminent Technology ET-2 Tonearm Owners -Just a remnant of my undergrad and HS years. -Not much else is left in this old cerebrum. | |
| Eminent Technology ET-2 Tonearm Owners PV=nRT as I remember. | |
| Eminent Technology ET-2 Tonearm Owners I get about 7.5 psi out of that setup which is what Bruce told me to expect. The noise isn't a problem as the pumps are in the next room in a closet. If I deadhead the pumps' output, I get around 12 psi. -And my manifold is the high pressure versi... | |
| Eminent Technology ET-2 Tonearm Owners I use two wisa pumps working out of phase with each other in parallel, two large surge tanks in series with a small surge tank made from a plastic radio control gas tank, sitting a few feet from the ET-2. When I did the above test, it was complete... | |
| Amps from the 1980's -- What gear holds up sonically? Reliably? Speaking of Ampzilla and Mr. B, I owned a Son of Ampzilla in the 70's. I didn't like the lack of on-off switch, and called Mr. B about it. He just said fine and sent me an outboard switch to install myself. -Never used the switch but liked the amp... |