jsman
Responses from jsman
| Speed stability issues with my Teres turntable... I have a Redpoint Model D tt and I had some speed issues a while back, I got a new motor from Maxon thinking that was the problem it was not. Same speed issue as before so I did some checking turns out it was the motor circuitry. I bought a cheap ... | |
| Brass Pulley for My TT Update:Turns out it was the belt leaving the residue, kinda weird though none of the belts I used in the past did this... I am thinking maybe because I am near the end of the roll of Mylar had something to do with it? | |
| What Type Belt Are You Using @analogluvr ,What type VCR tape are you using? Is it 1/2" wide? Do you do anything to it before installing it? Or do you just splice it and go? | |
| What Type Belt Are You Using @palasr ,I wanted to try one of the Kapton belts but, at $85 each I think not. I can make a Mylar belt for less than 8 cents.... | |
| Brass Pulley for My TT Update:So I had the machine shop make another pulley from SS and wouldn't ya know it , it is also leaving a residue. So now it is either the belt itself or something the shop used on the material I guess??? | |
| Upgrade for users of 1/2" mylar belt Has anyone found a replacement tape for the mylar streamers? I can't find it anywhere so may have to use a replaement type of some kind. | |
| Upgrade for users of 1/2" mylar belt Update for any concerned, I used a machine shop to have two pulley's made. One from brass and one from ss, both seem to work good but, the brass one is leaving a residue like dust on the platter which i fear may mess up the finish so I am trying t... | |
| Brass Pulley for My TT Turns out the original pulley was made from brass also... | |
| Are There Any Redpoint Owners Here Well I had the machine shop make me a brass pulley for the new motor setup I bought, it works great except the new pulley is leaving a brass residue on the belt and platter. Probably gonna have him make me another pulley from SS. | |
| Brass Pulley for My TT invictus005,Yes I agree my other pulley is made from SS, he told me he would make one from SS if I wanted it. | |
| Brass Pulley for My TT brf,I am hoping you are right, that's what I am thinking also. That the shop didn't polish it enough I guess time will tell. | |
| Are There Any Redpoint Owners Here I agree, I replaced the Maxon motor about 2 years ago I only have 200 hours on the TT since changing the motor. I did buy a complete motor and controller assembly but, I think it is too light for the heavy platter. I won’t know for sure until I ge... | |
| Redpoint Model D turntable. . You won't get any help there but, they are simple to setup... | |
| Are There Any Redpoint Owners Here Well thanks guys, I was just wondering if anyone knew where a new pulley could be gotten? I have since gone to a machine shop to have one made. To my knowledge there are no more dealers Peter has gone into hiding, so it's a good thing not much can... | |
| Are There Any Redpoint Owners Here Wow!!! over 70 views and not one reply!!! |