korakotta
Responses from korakotta
| Amp and volume control for JBL 4367? I`d prefer a solid state or an integrated. I listen to all types of music. | |
| Best Phone Stage for under $1,000.000 I loved my Musical Fidelity MX VYNL.It's gonna be really good if you are choosing cartridge above 0.4mV. I sold it only because of my new cart is operating at 0.2mV (Ikeda 9TT). It's upgradeable, full balanced, with excellent sound stage etc. Buy ... | |
| Best wood under audio components? Which one would you choose and why? | |
| Best wood under audio components? Thank you for all of your helpful comments!I have a chance to choose between Norwegian maple, Ash, White Oak, Red Oak, Walnut, Elm, Ceder, Mahogany, Pine, Norwegian Birch, Elm, Siberian Larch. | |
| Best wood under audio components? There are 2 levels only on my rack. The top is the TT (VPI Classic 1), the phono (Gold Note PH-10) is under. Both of them are sitting on sandbox. Each sandbox has a tile placed directly on the sand. The middle layer is a tube, and I am trying to f... | |
| ClubWOOD or Shun Mook? Ok, that means I am going for the Diamond Resonator under my VPI Classic and 3 SM discs on the plinth. Let`s see the results first, then I am going to decide the rest from that. But which DR would you recommend? The TT is 23kg. | |
| VPI Classic 1 isolation upgrade Yes, it`s pretty difficult. They say, there is some difference between the norwegian birch and the baltic. Can it be sufficient?Shun Mook concept. 50% of the internet are raving about the sound, 50% think that`s just a hoax. I think the truth is s... | |
| VPI Classic 1 isolation upgrade Thank you for saving me from the marble...Meanwhile I am looking for baltic birch plywood what is kinda difficult here in Norway. Do you know any other type of wood what can be just as good? I am gonna stay with the inner tire in between the layer... | |
| VPI Classic 1 isolation upgrade Thank you! I used the last few months to find out which way to go...Money is an issue, so I would do it around for the same sum as any of my 4 choiches.What is for sure. I am going to change the tile and the 1" MDF to marble. Does it make sense?Wh... | |
| Running a LOMC in MM setting? I got an answer from Gold Note. They have really good customer service btw. " Dear Milan,It is a clearly a saturation signal problem.For which reducing the gain using the MM input fix the issue.There is no way of damaging the cartridge because th... | |
| Phono (0.1- 0.22mV+) or step up for LOMC? The Dynaudio BM5 MKiii are active monitors with built in amp, balanced ,unbalanced inputs. | |
| Phono (0.1- 0.22mV+) or step up for LOMC? It's a pair of Dynaudio BM5 MKiii. It sounds like a big improvement after I went balanced, so I want to keep it that way. | |
| Phono (0.1- 0.22mV+) or step up for LOMC? That is unfortunately way out of budget... | |
| Phono (0.1- 0.22mV+) or step up for LOMC? I got down to the following options. It`s not not gonna be a SUT, but a phono upgrade first -but I am open to purchase one later-I am living in Norway, so my options are a bit limited.Which one would you choose from the following?1. MF PSU + go... | |
| Phono (0.1- 0.22mV+) or step up for LOMC? Thank you for all the replies. I changed the unbalanced cables to balanced. The cables need to burn in,the octaves are incomplete, but it feels like I got 5-10db and overall better sound quality, so that's gonna be like that.I decided to buy a pho... |