lak
Responses from lak
| High fidelity REVEAL interconnects Regarding my post above of 6/23/17 I probably should have also mentioned the HFC MC-0.5's also. In another thread, many report good success with the addition of the MC-0.5's. | |
| High fidelity REVEAL interconnects I have not heard the Reveal products however I do have a full loom of HFC U & UR installed in my main system. I believe that trying the HF or Reveal power cords or the MC-6 or Hemisphere can be a more obvious way to hear what magnetic conducti... | |
| Isolation footers for amps Thanks, Robert! | |
| Cerious Technologies NEW Graphene Cables I agree the CT speaker cables work very well.Any system I've tried them in at home or in other fellow audiophiles systems they have been supurb! | |
| Isolation footers for amps A question of speculation:In principal, what's the difference between the DH Cones from Golden Sound and the Star Sound brass Audio Points with brass Coupling Discs?Someone, please school me... | |
| Will power cable work well as speaker cable? @boxer12, Chris at VH Audio is an honist stand up guy. Whay not email him with your question? | |
| Has anyone tried these stunning new CPT power cord? @t_ramey, When I received my 1800, I took the 300 out of my two channel system and moved it to a different room where I use the 300 with a power strip and plug my flat screen TV and Oppo BDP-105 into it.I did not find an advantage when I tried th... | |
| Has anyone tried these stunning new CPT power cord? @t_ramey, I do not use my 300 to power my 1800.I might be wrong and if I am I want someone to correct my next statement.It seems to me that the 300 power cord (including the 50 and 150) would limit the full potential of the 1200 / 1800.I find that... | |
| High Fidelity Cables CT-1designed by Rick Schultz @debjit_g, you might find the answer you are looking for by reading the following Audiogon forum: https://forum.audiogon.com/discussions/high-fidelity-reveal-interconnects (if you have not done so).I don't remember if someone tried both and wrote ... | |
| Allnic 1201 and Herron VTPH-2 @saki70, you might try contacting Audiogon member Albertporter. Although he sells Allnic products and others it's very possible that he has heard both phono preamps. | |
| Isolation footers for amps I still have several sets of Herbie's Tenderfeet and, Herbie's Tall Stiff Tenderfeet. These were the last tweak I was using under the Integrated amp, Transport, and Dac.At geoffkait's advice, I switched over to the Super DH Cones from Golden Sound... | |
| Speaker cable recommendations with Magnepan .7s Although this will sound absurb to all readers the price is right and the sound is good. If you havent tried this then don't knock it.10 or 12 gauge solid copper wire that you can pick up at Lowes or HomeDepot etc. | |
| Lifters ForGetting Cables Off The Floor, Worth It Or Snake Oil BTW; I've used wood blocks, wood blocks with a large V cut into the top and the cable supported by a large heavy duty rubber band, porcelain cable insulators, and acrylic lifters. They all worked and I could not tell the difference based upon musi... | |
| Lifters ForGetting Cables Off The Floor, Worth It Or Snake Oil I always have my speaker cables and power cords lifted off the floor. Yes, it does make a sonic difference and one doesn't need to spend a fortune on fancy devices to obtain that goal, however, I'll admit that some of those cable lifting devices d... | |
| High Fidelity Cables CT-1designed by Rick Schultz @debjit_g, of course, the answer you didn't want is the suggestion of trial and error because all systems can be different. With that said based on my HFC experience, I'd say Dac to preamp. Remember the interconnects need to stay in place for seve... |