marakanetz
Responses from marakanetz
| No sound from cdp. check interconnects connected tight first, than if you have a headphone jack try to see if you get any sound from there.you can also try to get a cheap DAC to see if your digital out is functioning. | |
| Which One Amp for the Magnepan 3.6's? Sunfire Signature(600Wpc) load invariant amp is the best so far from Bob Carver. | |
| What next, after finalising components ? mo media | |
| Prefered Freight Company uship.com | |
| B&W vs Vandersteen? All Bowers have a shy bottom end and yet one of the best midranges.Vandy's have enough resolution on that ballpark but the bass response is extremely slow compare to the speakers of the same class. If you plan on Bowers and need more bass I would ... | |
| Tube Monoblock location? - Rack or near speakers? in case with quickies that have a very high input sensitivity and low output power the advice is correct. | |
| Favorites Alone In Quiet Darkness Jelena Jensen. | |
| Decent moderate priced speaker for large room Consider Aerial 10t | |
| New MH PH25.2 Headphone Amp as tube buffer? Headphone amps usually have a line-level bypass that doesn't go through the amplification components. | |
| What is the best RCA interconnect? It should have Neutrik plugs. | |
| KLH speakers. Your opinions wanted IN early 70's.Their price is near $50 | |
| Which cable do you think is most important? 1. Power cables for all unless components have battery operation. Make sure they exist and connected!2. Speaker cables (unless you use headphones) only if connected properly3. All amp preamp and source interconnect wires (if you use ipod docking s... | |
| New spreakers sound great But efficient speakers don't have bass unless the woofer is 12"+ in diameter. | |
| buzz from one phono preamp more than another? Check your cartridge clips if they're connected properly.Any clip weak or loose? | |
| SHOW attendees: please post speaker reports here I confirm 10t since I didn't listen to 20t |