ninetynine
Responses from ninetynine
| EMT JSD P 6.0 Oh, cool! Thanks!!!Thomas | |
| TW-Acustic Arm I am ashamed of myself for my German countrymen. They are no longer welcome in German forums and pollute this here now.I had previously a Reed 3P but the TW has impressive dynamics and transient playback. Thanks to "dgad" for his informative posts! | |
| EMT JSD P 6.0 Hi, the P 6.0 has a saphire cantilever and a special polished diamond. | |
| Van Den Hul what is the best cart ? I like A.J. but the quality control could be better. https://www.dropbox.com/s/hrlivjikl3okc74/2015-04-15%2011.54.29.jpg?dl=0A genius but maybe a slob too. https://www.dropbox.com/s/urua9igv05u04vq/VdH%20workbench.jpg?dl=0 | |
| Carbon Fiber Brush with Milty Gun? How do you guys use this pistol? Do you slowly rotate over the vinyl while pressing it or do you hold it over the center of the record? Which distance do you hold? | |
| Pani ... New ART-9 up and running ... My second PTG is here and all is fine. 30 and 32dB channel separation and 0,4dB difference in channelgain. Can anyone measure the ART9 with Adjust+? | |
| Woofer pumping WHY?? https://www.youtube.com/watch?v=R1yvgCINtI4Here you can see the needle moving left to right. | |
| Woofer pumping WHY?? Hi Matt, had the same problems after my Lyra Kleos was to repair. When i got it back the compliance was softer and i had this pumping. Look here VideoThe deflection of the needle because the decentered records correlates with the woofer pumping.No... | |
| Pani ... New ART-9 up and running ... I am from Germany. Tell you when the new PTG is arrived. It will placed on my second arm. On the first i have an EMT JSD6 and it would be very interesting to hear the ART9 against it. | |
| Pani ... New ART-9 up and running ... No, i don`t have such a problem. The AT33 was mounted and measured from Chris Freickert. 3 Lyra`s, 1 VdH and an EMT were very well built with very good Adjust+ results.Here is someone else with this problemshttp://www.vinylengine.com/turntable_for... | |
| Pani ... New ART-9 up and running ... I had an AT 33EV, OC9I and now an PTG33II. The last one will be changed by guarantee these days. All these cartridges had an azimuth-missalignment about 2°.These are my measurements:http://www.vinylengine.com/turntable_forum/viewtopic.php?f=19&... | |
| Pani ... New ART-9 up and running ... Have you measured the channel separation and left / right balance? Audio Technica has some problems with. | |
| EMT JSD High Output - Charlie Byrd Direct Cut The distortion is with RCA connection too. The distortion is on the preamp out`s of the Pass too. Yes, the distortion is generated in the Pass.Do you read this? I connect a Focusrite Firewire Interface to the Audia Pre Outputs with XLR cables. Thi... | |
| EMT JSD High Output - Charlie Byrd Direct Cut Ok, you`re right.1. ChainEMT JSD6 - Reed 3P - Audia Flight Phono (250Ohm) - XLR cable - Pass Labs INT-150 - Dynaudio C1 Signature2. ChainAT OC9 - Jelco 750 - same restWith second chain this trumpet is played without distortion. | |
| EMT JSD High Output - Charlie Byrd Direct Cut The Pass is ok and the tonearm cartridge combination too. I tested a headphoneamp at the outputs of the Audia. The Charlie Byrd song is played absolute fine. I connect a Focusrite Firewire Interface to the Audia Pre Outputs with XLR cables. This a... |