simna
Responses from simna
| Curious what people think is the best "value" high end speaker (~5K to 15K) Tannoy Legacy Eaton with a tube amp. | |
| Problem related to Push-Pull or EL34? @jond Actually to bias is not the big problem. There's a 8-pin connector on one side of the amp where this special TT Bias Meter is supposed to be connected. I have figured out which pin goes to which tube and then I use a multimeter to measure th... | |
| Problem related to Push-Pull or EL34? @jond I'm in Sweden. You mean he answered your mail? I would love to have the schematics over the Unisis Signature and have someone figure out how to bias it without the special bias meter TT made. Or even better he could tell me how many mV the t... | |
| Problem related to Push-Pull or EL34? @Yes, but the company doesn't excist anymore. I've heard that the guy who owned TT has left England for US (and are now working for Manley I think). | |
| Line Magnetic quality I’ll take my chances and buy the LM34IA and hope that new tubes, (gonna replace them all; EL34, ECC82 and ECC83) helps. If this don’t do the trick I’ll try other capacitors or... something else...😀 | |
| Problem related to Push-Pull or EL34? @jondYes, maybe my old TT is a better. But I have had problems with it or maybe I have had bad luck with the two last quads EL84 tubes. I’ve had trouble with elaking tubes and the bias not being stable and I’m not even sure if I have the right inf... | |
| recommendation for speaker wire to soften the highs if possible @gunmetalzinI had the same problem in an earlier set up an the solution for me was Supra Classic speaker Cables. It doesn't cost much to try if these cables will solve your problem.https://www.ebay.com/itm/Supra-Classic-4-0T-Speaker-Cable-Per-Metr... | |
| A DAC that crushes price vs. performance ratio @lula There is only one tube, so you have to be sure that it is balanced and you have to screw the lid off to replace the tube. | |
| Problem related to Push-Pull or EL34? @lowrider57 Yes, I'm gonna change the tubes, but I really wanna know the brand of the stock tubes before I do that. They are just labeled "Line Magnetic". If this dosen't do the trick I will have the capacitors replaced.Yes, the speakers are easy ... | |
| Problem related to Push-Pull or EL34? When comparing these two tube amplifiers everything else is the same except for the amplifiers. I have just switched between the amplifiers. I have tried both the 8 ohms tap and the 4 ohms tap. I’m grateful for your posts but I wonder how I will k... | |
| Line Magnetic quality @miguecaYour favorites are out of my budget, but I’ve been looking at the 88AI and wonder what the differences between 88AI and 34AI are. I can use KT88 in both, so what makes the 88AI a better choice if I wanna use KT88 tubes? The 34AI seems to... | |
| Line Magnetic quality @shkong78Thanks for the tip, but the 508 is not in production and the 805 costs three times more than LM34IA and that is a lot over my budget. | |
| Line Magnetic quality Now, after a little more than 50 hours burning in, I’ve given the LM34IA a serious listening and I’ve made a comparison with my old Tube Technlogy Unisis Signature with EL84 tubes.Differences are; Treble: TT more extended and more open than LM.Mid... | |
| Line Magnetic quality OK guys, you have convinced me. I’ve found a dealer just 45 minutes away from where I live. And he has the LM34AI. And I can take it home on friday. But it’s brand new, not even unpacked so the tubes need burning in. My experience says about 50 ho... | |
| Line Magnetic quality @ozzy62 Mind me asking, why did you sell it? |