taviran
Responses from taviran
| Jadis JA-80: Tubes and speakers. One last note to put the record straight. it turns out the problem I had with the Jadis was just tube matching. After measuring the tubes (KT-120) and matching them properly, it now works perfectly: no problem of bloated bass or speakers matching.... | |
| Jadis JA-80: Tubes and speakers. Thanks for all the responses. rhljaz, I did try another preamp, the Luxman C900u. To my ears The JA80 sounded better with the JPL. About speaker synergy, I also tried another modern speaker, the results were somewhat better but not what I was look... | |
| ESP Speakers Hi Guys,First, I wanted to thank rhljazz for his help. I should have done it sooner but life took me in other directions lately. I was finally able to refurbish the ESP crossovers on my own. While at it, I changed some parts (caps, resistors) to h... | |
| Luxman m-900u owners - quick question I also have M900U and C900U. Had Jadis and other hi quality tube amplifiers in the past and now switched with the Luxmans to SS. I am very happy. | |
| ESP Speakers Hi Guys. Do you have a schematics of the crossovers of the Bodhrans? After living for a few months with my speakers I came to the conclusion that something was wrong. I just couldn't get them to image properly. So a few days ago I unscrewed the bo... | |
| Luxman M900U any experience ? I want to second your impressions of the Luxman m900u. I have it with the matching preamplifier, C900U and I think I now get the best sound I ever heard anywhere. I used to be a tube guy and owned Jadis, Ear, and other quite good pre/power combina... | |
| ESP Speakers Last update: After some soldering and some tweaking, the sound now is excellent: open, detailed, dynamic, very musical. What a wonderful speaker. | |
| ESP Speakers Hi again. thank you rhljazz for the quick reply. Well, I fixed the tweeter problem. I unscrewed the bottom where the crossover is located and found a white wire disconnected. soldered it back and it's working now. What a relief. And thank you for... | |
| ESP Speakers Hi Guys, Well, I have finally received my ESP Bodhran SE speakers and I must say that so far I am not too excited. They sound quite muffled and it seems to me that one back tweeter on one speaker is not working. Any advice about what can be done w... | |
| ESP Speakers I want to thank both George and rhljazz for their replies, this was just what I was looking for: very informative comments from one current and one former owner of ESP. From your answers, I believe I have learned that the ESP speakers are kind of ... | |
| Doge 9 listening experience... I have had these amps together with the Doge 8 preamp and the Doge 6 cd player since December 2013 (more than a year and 3 months), bought them directly from China through Mark. (I live in Israel). At first, the Amps with the original tubes sounde... | |
| emt 950, technics sp10 - direct drive sound I had a Technics sl-1210 and you can also hear it on youtube. I have an EMT 950, and this too can be heard on the net: http://www.shawsounds.com/restorationAnybody who thinks an EMT sounds even close to technics (although I haven't heard the sp-10... | |
| Is Direct Drive Really Better? I feel the need to correct here something I have said in my post above concerning the Lenco speed stability, and at the same time give some useful information to Lenco modifiers. In my post I complained about the wow and flutter of the Lenco turnt... | |
| Is Direct Drive Really Better? I must apologize. It is "audiobuddy" of course. | |
| Is Direct Drive Really Better? I would like to add my two cents to this forum for it seems to me there is an important assumption that is overlooked in the discussion. The assumption is that all people have (more or less) the same pitch sensitivity. So much so that we (audiophi... |