vegasears

Responses from vegasears

Difference in sound using different carts when digitizing vinyl record?
I ripped a few LP's years ago when I got back into vinyl, just to see how they would sound. Not bad, I still have them on my server.  After a cartridge up-grade, I re-ripping one and never did vinyl again. Yes, it sounded better but I am not going... 
Great equipt stand for under $500???
Salamander! They have wide range of racks and many can be configured to suite your needs. I had a Twin 40 and a few years later I added a couple new pieces of gear.  The parts were ordered and the twin 40 became a triple 40.https://www.salamanderd... 
Is a jelco sa750e low mass or high mass ?
I have a Jelco 750 with a Denon 103 and 103r both function just fine. 
Tube pre amp
Not long ago I purchased at few tubes from Upscale Audio so now half the Web sites I visit have advertising banners from Upscale.  Anyway they are really pushing the trade in's, a few pretty nice pre-amps.  Their site may be worth a visit.    
Why aren't new vacuum tubes as good as old ones?
Yes but current tube production is not critical to the communications business, like in the past. Tube makers could do better but where is the motivation.  Product longevity does not keep the line moving.    
Why aren't new vacuum tubes as good as old ones?
Current tube production is aimed at a small niche market.  Before transistors, tubes ran our electronic world.  They were critical and manufacturer's had to make quality product for the military, government and..  We are the hobby market and reall... 
The Absolute Sound vs Stereophile
I seem to always agree with Stevecham. "Fortunately, Audiogon, Steve Hoffman, Analog Planet, Vinyl Engine and others have replaced my magazine interest in written commentary, opinion, specs and general entertainment (when it's kept civil) about ... 
Mcintosh C2600 preamp tube upgrade
I've also got a Mcintosh C2500 and rolled out the Mcintosh branded JJ's.  I am current using Genalex Gold Lion 12AX7, the gold pin ones.  Before getting the GL's I had Mullard 12AX7's reissues but not the 4004's, they sound just as good as the GL'... 
Phono stage can minimize tics and pops on vinyl
When I got back to vinyl I started with prepackaged deal, TT, inexpensive phono stage and cartridge. Pretty easy to get started but not very rewarding. The surface noise almost made me sell the rig and stick with digital. Yet, I hung in there an... 
VTL Siegfried Monoblock Power tube rolling- Calling all VTL owners
I've been using VTL amp's for 15 years+.  First 300 Deluxe MB then I upgraded to my current 450MKII.  Over the years I've used SED Svetlana Winged "C" 6550 and still have a set w/spares, Shuguang KT-88's and GL-KT-88's.  I currently use GL-KT-88, ... 
Recommended cork platter for my SL 1200 GR Technics TT
Static electricity is an issue here in the dry desert.  I use a spray bottle of Demonized Water for cleaning LP's and it seems to keep the static in check.     
Musical Fidelity A308 Int: is it worth a service call?
I had a Musical Fidelity DAC 21cr i think.  The right channel went out.  I called the authorized repair facility for North America, in Montreal, Canada.  The person I talked to did speak english very well and I don't speak french.  What little com... 
New Vinyl
It's not the best out there but it also won't cost an arm and a leg either. The Allman Brothers Live at The Fillmore East on MFSL.  I've had issues with MFSL's product in the past, then when I think back to 1980, the quality of new vinyl is much b... 
Please evaluate my system...
Another cartridge, not that the one you are using is bad but a different prospective is always entertaining.  
Replacing my Krell FPB 600 amp with a tube amp
VTL 450MKIII