2. cables
  3. 146535-1557

3 things I learned from using MANY interconnect cables

At last, I am posting here for the first time! I got so much help from this forum and always felt a bit guilty about not contributing.

Over the past several years, I have used the following interconnect cables: Audioquest Golden Gate, Audioquest Columbia, Audioquest Sky, Monster Interlink 300 MkIII, Harmonic Technology Pro Silway (I have used both Mk I and Mk II), Silnote Morpheus, Anticables (the original version), Tara Labs RSC, Nordost Heimdall, Straightwire Crescendo, and Chord Anthem. They were all purchased used and I always had 2 or more pairs to compare at a given time although I didn’t have these cables all at once. Through the journey, I learned the following:

1. The price was NOT indicative of the sound quality unless you go very cheap (less than $100). I think this point is self-explanatory so I am not adding any elaboration.

2. Disconnecting and re-connecting the cables had a very positive impact on sound quality, which will affect any AB comparison. If you are comparing two pairs of cables that had comparable sound quality, the new cables will sound better because the connection would be fresh.

3. In my experience, the cables were NOT system dependent. This might raise some eye brows as it goes against the commonly held belief so I am going to explain a bit here.

All I am saying is that I have never seen a case where my preference order of two sets of interconnect cables got reversed when tested on two or more components (e.g. cable A was better than cable B on amp X but cable B was better on amp Y, etc). With any AB comparison I ever did, the better cable always won no matter what component I was testing them on.

Oh in case someone is curious, the best pair of interconnect cables I have ever used was Chord Anthem. It had a wider frequency range and a more natural tonality than others. And I would rather not add the qualification "but it was the best only in my system" because of the 3rd point I made above. Cheers!
johnson0134

Showing 1 response by millercarbon

millercarbon's avatar
millercarbon
324 posts
 
johnson0134,

You are of course absolutely right. So right in fact that I would think anyone who actually bothers to do what you've done would have to agree. Most of the people who disagree turn out to not have spent much time doing the work to know what they are talking about. The remaining doubters pretty much all fall into the category of haven't yet figured out how to evaluate the one thing being evaluated so that instead of looking for the best component they are looking for the best band-aid. Only they haven't figured that out yet.

Well there is one more category, but it is thank God a category of one.

Anyway the connection observation is important enough I've mentioned it to people many times. Especially when comparing something like a fuse its important to first remove the original, clean everything, and reinstall BEFORE attempting to compare with anything else.

Another thing I thought you might mention, though not surprised you missed it as its fairly subtle. Simply handling a cable, wiggling it around connecting and disconnecting, is enough to affect the sound. Disconnect a cable, wiggle it real good, connect it back up again. Listen as it takes a few minutes for the sound to settle back in.

Its actually kind of funny people thinking cables are system dependent. Like the laws of the universe aren't really laws, they're a little different every where you go. Right. Good one.

Nice observation. You are on the right track. Want to hear something really good, try any wire with Synergistic Research on it.
More to discover