Capnbob, As Larry inferred. There is no doubt that one could do the measurements done by the Foz "manually" with a proper test LP, a fine quality voltmeter, and/or a 'scope. The Foz is a matter of convenience and rapidity, plus you can be uninformed and still get it right, electrically at least. Also, good 'scopes and meters are not exactly cheap. Nor are the brains to use them correctly common among us audiofools. My only questions about the Foz are like those stated by Larry; I really would like to know exactly how it arrives at its "correct" azimuth setting, because there is more than one opinion on the definition of correct azimuth, even in the electrical sense.
Azimuth and the Fozgometer
Finally received the Fozgometer after a 2 month backorder. In the past I have always used a loupe and a front surface mirror to set the azimuth on my Tri-Planar with Dynavector XV-1S cartridge. According to the meter, I was very close to a correct azimuth. I wasn't prepared for the effects that a very slight adjustment would make. Nailing the azimuth has brought my soundstage into tight focus. I have never experienced this kind of solid imaging in my system.
I know that the $250 price tag is a bit steep for something that won't get a lot of use, but this is not a subtle improvement. There are other ways of measuring azimuth, that I am not very familiar with, but I would doubt that they are as easy to use as the Fozgometer.
I know that the $250 price tag is a bit steep for something that won't get a lot of use, but this is not a subtle improvement. There are other ways of measuring azimuth, that I am not very familiar with, but I would doubt that they are as easy to use as the Fozgometer.
- ...
- 68 posts total
- 68 posts total