Does anyone know if the fozgometer measures millivolts and compares them from side to side? If so, then couldn't one just use a millivolt meter or a oscilloscope to measure each side and adjust the azimuth until the voltages are the same? Or does the fozgometer measure something else?
Azimuth and the Fozgometer
Finally received the Fozgometer after a 2 month backorder. In the past I have always used a loupe and a front surface mirror to set the azimuth on my Tri-Planar with Dynavector XV-1S cartridge. According to the meter, I was very close to a correct azimuth. I wasn't prepared for the effects that a very slight adjustment would make. Nailing the azimuth has brought my soundstage into tight focus. I have never experienced this kind of solid imaging in my system.
I know that the $250 price tag is a bit steep for something that won't get a lot of use, but this is not a subtle improvement. There are other ways of measuring azimuth, that I am not very familiar with, but I would doubt that they are as easy to use as the Fozgometer.
I know that the $250 price tag is a bit steep for something that won't get a lot of use, but this is not a subtle improvement. There are other ways of measuring azimuth, that I am not very familiar with, but I would doubt that they are as easy to use as the Fozgometer.
- ...
- 68 posts total
- 68 posts total