You can measure a cartridge generator with volt meter to make sure
dead cartridge? Darn the Luck ! ! !
Old OM20 that I haven't touched in 20 years. Tried it direct thru my Onkyos phono pre. Nada.Then I tried an outboard NAD pre. Left only.
I swapped sides. Right only. Pre is OK.
I reseated the cartridge wires at the headshell, both sides, 4 pins.
Tested continuity from the cartridge wire through to the NAD input. All 4 pins good.
I know it's rare, but is there something I forgot? Seems I have a dead right side.
I swapped sides. Right only. Pre is OK.
I reseated the cartridge wires at the headshell, both sides, 4 pins.
Tested continuity from the cartridge wire through to the NAD input. All 4 pins good.
I know it's rare, but is there something I forgot? Seems I have a dead right side.
Showing 2 responses by chakster
Buy yourself a test record like Hi-Fi News Test LP to make sure your system works fine, you can check everything with this test LP (and there is a free protractor inside) |