2. member-reviews
  3. 1180637472

Review: Audio Research Corporation HD 220 Amplifier

Category: Amplifiers

My musical tastes include primarily classical, jazz, folk/blues and some exceptional rock. Specific recordings can be discussed via phone @ 610-721-1304. Soundstaging, dynamics, transparency and coherence are paramount, while the correct tonality and warmth are of equal concern. In other words I need it all to be right or else I sell the stuff! My HD 220 has 300 hours on it at this point and it is exceptional indeed. My recent decent into Krell evo solid state gear left me wanting so I sold the rig and started anew.

When a system is in the "zone" for me it conveys lifelike dynamics, accurate tone, clarity with warmth and soundstaging to die for!! This amp does it like no other I've had on all types of music (taken as part of my current setup). One major note...USE THE STOCK POWER CORD!!! The HD 220 started to amaze me aftethunderousr I decided to try it's own power cord in place of my reference cords. As long as my ref 3 has a great power cord all is well. The amp conveys a sense of limitless power with explosive yet controlled dynamics...it is effortless but with great force and dynamic swing!! Treble is extended and full of sparkle but grainless and pure at the same time. Midrange is full and neutral with a tad of warmth, but not overdone. Bass is earth shaking and well defined with amazing definition. Focus and placement of instruments is the best I've heard. Width and depth of the soundstage is top notch as well. Palpability and presence are eerie baby...spooksville!!

Compared to the other great tube amps past and present it connects on excitement, dimensionality, dynamics and extension without the tube haze, lethargy and softness often found with their presentation. I prefer it over the 110 for real world reasons and for purely musical ones. Overall it takes one away with the music where very few other components take you!!

Money is no object for me ...the HD 220 is staying..it's that good!!

Associated gear
ARC Reference 3 preamp
Krell SACD standard V5.1
Krell Resolution 2 loudspeakers
MIT V2.1 Oracle IC's and speaker interfaces
Transparent MM power cord (ref 3)
MIT AC2 power cord (Krell SACD)
ARC stock power cord (HD 220)
Wattgate recepticles
Dedicated 20amp lines

Similar products
ARC VT100, VT200, VS110, VM220's, Ref 110, Ref 610T's
Krell FPB 600, 400cx, 350Mcx, evo 402
Levinson 336
128x128dave_b

Showing 3 responses by dodgealum

dodgealum
976 posts
 
Dave:

Thanks for all the time you've spent sharing info about the HD220. I'm a 150.2 user at the moment with an SP16. Before the 150.2 I had a 100.2 but it ran too warm in my in cabinet installation. The cabinet is open in the back and in the front when the door is open. I like the 150.2 but liked my old 100.2 better--more musical, real and engaging. Should I be considering the HD220 or will this piece also run too hot in the cabinet? I know it has fans but there will be precious little side and top clearance once installed. (For a look at the cabinet and my current setup you can see my ad for the Daedalus DA-1's). So, as one of the few folks who seem to have logged considerable time with the HD220 would you mind helping me out?
dodgealum
976 posts
 
Dave: Any idea what the peak current output is for the HD220? The ARC site does not give this specification. The 150.2 can deliver 15amps peak current before shut down. I'm guessing the HD220 is about double that figure but would be interested in knowing if the owners manual or some other source provides the specs.

BTW: Does anyone think I'm wasting my money on a HD220 running it with an SP16? I may be able to upgrade the preamp to a LS26/PH7 at some point but right now I'm stretching to replace the 150.2 with the HD220.

Also, any reviews of the HD220 out yet?
dodgealum
976 posts
 
Thanks, Dave. I'm currently running Daedalus Audio DA-1's which are 96db sensitive, a pretty steady 6ohm load but, according to the designer, like amps that can deliver plenty of current. I have a 20amp dedicated line serving the electronics and Porter Ports outlets. Glad to hear the amp runs cool since this is most important--the amp will be inside a cabinet that vents front and rear but will have little room on the top and sides for air flow. How noisy are those fans?
More to discover