2. amps-preamps
  3. 1017070058

power cords and krell amps any suggestions?

I'm thinking about upgrading form the stock cord for both of my amps a Ksa 200s and a Kav-500 3. We are using the Audioprism
Power Foundation lll, I also have 2 20 amp dedicated circuts for the system with the orange heavy duty recepticals. Which power cords have you tried and what were the results? Or would I be better served upgrading my recepticals first? I would like to here from Krell owners but of course all imput would be helpful.
Thanks for your help.
phanl
simancd
23 posts
 
I've had great results using the stock power cords on my krell amps with the PS Audio high current ultimate outlets. I would highly recommend this setup.
lak's avatar
Ag insider logo xs@2x
lak
3,516 posts
 
I would try the FIM 880 outlets first. If you desire more after that the outlets would be a keeper and you could try different power cords.
sean
6,229 posts
 
Due to the high current draw, make sure that any power cords that you use are heavy in gauge and fit tightly into both the wall outlets and IEC jack. Keep in mind that heavy gauge conductors ( 12 gauge or better ) does not necessarily mean "big in diameter" or "hard to bend". Sean
>
audiokinesis
1,872 posts
 
I'm not familiar with your particular Krell units, but I've had customers who like the synergy of Shunyata Research power cords with their Krells. The Shunyatas are voiced on the warm, rich and lush side, which helps make the highly revealing Krells a little more forgiving of less-than-perfect recordings.
squidboyw
35 posts
 
I upgraded my stock cords to Transparent powerline plus cords with good results on my MDA-300 amps. Even better results are had with the DIY power cords (flavor #2) designed by Chris Ven Haus. His web page is:
http://www.geocities.com/venhaus1/diymains.html.
I have since upgraded all the cords on my Krell equipment with these DIY cords and am very pleased with the results. The longest cords was less than $50 to produce. Well worth looking into.
More to discover