Rattle from Ceramic art pieces


Hanging On the rear wall about 8 feet up are 4 ceramic art pieces. Any low frequency sounds such as drums, bass cause these pieces to rattle. Any suggestions on how I could dampen this rattle. Taking down the pieces is not an option.
areddivari
David99, can you remember the name of that "no-name". The two samples that I tried were definitely more sticky, tacky, and softer than Blue Tack, especially if they were warmed up (like summer time here in Arizona!) Let me know...and thanks for your input!
Fatparrot-I live in N.Y. Nothing gets sticky or tacky here. :~)
I do not remember the brand name of the stuff I had a while back.All I remember is it was blue and came from wal-mart.
I feel it was exactly like blue tack.
I dont have it anymore as my daughter got a hold of it and used it up on her posters.
Next time I hit that store I'll see if they still sell this particular brand and let ya know.
The cheap stuff works fine. There is a yellow one I think most Ace hardware stores carry it. Kmart too!
I've used some "generic" Blue Tak and also thought that it was "stickier". The stuff that i tried came from a graphic arts supply store but i don't remember the name.

As a side note, i think that all of this stuff will leave some type of oily residue behind it, so be careful when using it. You might end up with dark spots on your finish or paint if directly applied.

Other than that, try sticking a thin layer of re-bond carpet padding between the ceramic art and the wall. If you can cut the padding to the contour of the art, you'll never see it and it will damp the vibration from being transferred from the wall into the ceramic and at the same time, damp the air-borne vibrations that the ceramic pieces themselves pick up. You can probably get some scraps from a local carpet joint for free or next to nothing. Sean
>