Best speaker cable for Revel F-208's


Looking for opinions on what the best speaker cable would be for the 208's.
Im curious if pure copper, copper silver mix and what manufacturers would be a good fit. Is it better to bi wire or use single cable with jumpers. In the past what I have done is use two single runs on each speaker and they would be different manufacturerers one for the bottom end and one for the top.
128x128mancuso54
One bit of advice I can offer is that it's not a good idea to mix 2 different cable types to a speaker unless you've checked their specs.
Speakers need low inductance cables which contribute to their resistance, and they need to be matched (or very close). One cable to the high/mid and a different cable to the bass may be of a different type of metal, or have a stranded or solid conductor and could make the sound not coherent from the different drivers.

As far as biwire or using single cable with jumpers, there are many, many threads in the archives.
While you might get some good suggestions from Revel owners, I would offer the following. First, make sure your amplification is right for the Revels since that is arguably more important than speaker cables. Then, order three pairs of cables from The Cable Company and try them out in your system and choose the one you like the best. I've tried the other way--buying cables off suggestions or reviews or because you got a "deal" on Audiogon, but my recent experience has convinced me that using the Cable Company is the best way to go. I chose bi-wire cables from Purist Audio to match with my Harbeths and Ethan was very helpful in telling me how bi-wire works (or doesn't).