Roger wrote,
"geoffkait: Maybe your amp would run more perfectly if you isolated it or is it immune?
Actually it is not immune - as tbg pointed out he was able to deal with some vibrations affecting the amp in his system."
Actually, and I hope I'm not being too picky, but Tbg is using mechanical coupling - not isolation, at least in the strict sense of the word, to deal with vibrations. I already mentioned somewhere along the line that coupling doesn’t isolate the amp from seismic or other structureborne vibrations, at least not nearly to the extent that mass-on-spring isolation devices are capable of. You definitely won’t see LIGO using mechanical coupling in their gravity wave detection experiment for isolating the sensitive optics, etc. LIGO relies very heavily on isolation of many types and stages to achieve the extreme sensitivity required to actually observe gravity waves, which I already pointed out have the amplitude of the diameter of a neutron. How sensitive is the experiment? It’s so sensitive that the noise of atoms moving in the sapphire thread used to support and isolate one of the mirrors is an issue. And we know that the tonearm, cartridge and tonearm wiring, just for example, have resonant frequencies Circa 10-12 Hz. So any vibrations of that frequency range coming up through the couplers will excite those resonant frequencies, no?
