2. amps-preamps
  3. 124134-67309

Help! My system is very bright it hurts my ear

Anyone..help...Here is my system listed...I'm new to audio...cd is raysonic 128 with 2 amperex gold pin 2 EH (6922)...golden audio se40 with 6 of JJ 6l6gc..Macintosh c40 pre.amp..new Aragon 8008...n pair with quad 22l2..here is the hook up, I hook up golden audio to high n mid and hook up Aragon for base...I have tried different speaker like Gallo 3.1 n monitor s8i but still too bright..is just too bright...any help please?????  Oh..forgot the system is in living room with 20' ceiling, could it be acoustic issue or pair issue, tube, amp, speaker....help please?????
fatgosil
kenny928's avatar
kenny928
47 posts
 
Interesting read for sure.  I would have the same issue with various brands of speakers.  Try going to your local shop and sampling the music on their system to see if you have the same issue.  Of course, many suggestions provided make good sense as well.
tzh21y
1,377 posts
 
Change the fuses.
xaviercg
9 posts
 
It's  about fine tuning your system.
You don't necessarily need 
to buy new components.
I would emphasize concentrating
on better cabling and a better power
conditioner. ( I would highly recommend
Acoustic Revive any of their models ).

I'm speaking from my experience.
I live in the inner city of L.A. walking 
distance to Dodger stadium.
In my case it was more than brightness
but severe RFI and EMI due to an
AM broadcasting station with 6  200 ft.
antenas on a hillside.
Well I got it down to zero and without
compromizing my systems resolution.

I would also like to recommend: 
Akiko Audio tuning sticks &
Kemp Electronics SR plugs.

Nevertheless, best luck,

Xavier








truesound45
3 posts
 

Aragon 8008 is the culprit, I used to have one, upgraded from a Yamaha MX-1000 - the 8008 was only slightly better..

 It's a bright amp and not very smooth..

lowrider57's avatar
lowrider57
3,018 posts
 
@fatgosil,
any progress yet on finding or fixing the brightness issue?
More to discover