Get a newer Velodyne properly sized for your room. I just replaced a 1991 ULD 15 with a DD15+, and there is quite a difference in output and detail.No other sub on the market will have the detail of a Velodyne.
Will a new sub sound better than my Velodyne F1200?
For music only...
I have a Velodyne F1200 (early 1990s model) and I have a Velodyne SMS-1 parametric EQ driving it. The F1200 is a sealed 12 inch servo sub. I think it's limited to 125W or so.
Does anyone know how a new non-servo sealed sub like the HSU ULS-15 MK2 would compare at normal volumes (85db peaks)?
I feel like my system is lacking punch and speed with the kick drum... it's a little slow a fat sounding, even though I've got my phase and equalization dialed in. One thought I have is that the SMS-1 adds a delay, and I'm assuming a servo sub might add even more delay, so even though phase is ok in the crossover region, the sub could be behind quite a bit in time. In fact, the sub is farther away than the mains by a couple feet, which may compound the problem.
I'm assuming the punch from a kick drum should be mostly sub, or is that up above 80hz?
I have a Velodyne F1200 (early 1990s model) and I have a Velodyne SMS-1 parametric EQ driving it. The F1200 is a sealed 12 inch servo sub. I think it's limited to 125W or so.
Does anyone know how a new non-servo sealed sub like the HSU ULS-15 MK2 would compare at normal volumes (85db peaks)?
I feel like my system is lacking punch and speed with the kick drum... it's a little slow a fat sounding, even though I've got my phase and equalization dialed in. One thought I have is that the SMS-1 adds a delay, and I'm assuming a servo sub might add even more delay, so even though phase is ok in the crossover region, the sub could be behind quite a bit in time. In fact, the sub is farther away than the mains by a couple feet, which may compound the problem.
I'm assuming the punch from a kick drum should be mostly sub, or is that up above 80hz?
- ...
- 18 posts total
- 18 posts total