For tube amps, pick up two 8 ohm resistors with at least a 5 watt rating. Quality doesn’t matter - only value and power dissipation. Those rectangular, sand-cast resistors typically available at Radio Shack are fine for this purpose.
Put one across each binding post and you now have a friendly load presented to your amp.
The exact value doesn’t matter, but keep it in the 8 ohm range which will work irrespective of which tap your transformer is set to (4, 8, 16 ohms).
Cheers,
Thom @ Galibier Design
Put one across each binding post and you now have a friendly load presented to your amp.
The exact value doesn’t matter, but keep it in the 8 ohm range which will work irrespective of which tap your transformer is set to (4, 8, 16 ohms).
Cheers,
Thom @ Galibier Design