2. amps-preamps
  3. 129521-91955

Amp upgrade for Aerial Acoustics 10T's? (

I recently picked up a very nice pair of Aerial Acoustics 10T v2’s to replace my ADS L1530’s. I love the AA’s for a number of reasons, but I’m worried they might be a bit too demanding for my amp. My current amp is a vintage GAS Ampzilla that’s had Mike Bettinger’s reference restoration with JFET input mods. It’s rated at 200wpc, but I’m not sure it has the current necessary to drive the AA’s through demanding, bass-heavy passages.

I rarely listen loudly, but when I have, I’ve noticed the amp’s power meters dimming on the heavy bass notes. The meters only indicate ~100wpc, but I don’t place any confidence in their calibration or accuracy. The amp also loses its composed and detailed presentation at these listening levels. I think it’s trying to tell me it’s being pushed a little too hard, and the last thing I want to do is damage the speakers or the amp.

So that brings me to the topic of this thread; can I find a suitable replacement amp for less than $1k? From what I understand, the AA’s really shine when driven by a high wattage, high current amp. I’ve been looking around for used alternatives and have found a few that may, or may not have potential.

Threshold S/300 ($900)
Nakamichi PA-7 ($890-975)
Bryston 4B-ST ($999-1150)
Perreaux PMF 3150 ($995)
Aragon 8008BB ($1175...yikes, easy to get over budget)

What do you guys think? What other amps would you recommend?


matt0404
matt0404 OP
13 posts
 
Thanks for the detailed info @auxinput.  I'm intrigued by the Aragon as I feel the 10T's could benefit from a little added warmth.  I enjoy tube amps on some of my more efficient speakers, so the Aragon might be a good fit.

The 3B-SST is one I didn't have on my radar.  I have read that most consider the SST version an upgrade from the ST, even going from the 4 series to the 3.  I'll have to do a little more research.

I haven't heard any of the newer Emotiva amps.  They do have the benefit of being under budget and less likely to need service.  I wish I could find one to audition.

The need to re-cap/service these older amps is the main reason I'm on the fence about an upgrade.  The amp I have now has already had a $1500 restoration and I'm not likely to get that much for it on the used market.  Decisions, decisions...
auxinput
1,538 posts
 

If it's warmth that you like, the Bryston amps are probably not a good choice.  They typically have a very vast attack and can be on the cold/sterile side.  Not bad, but not as engaging as other amps.  It could be a good match to a very slow speaker that needs more excitement (not the Aerial 10Ts).  It appears that the new Bryston Cubed amps (i.e. 3B3) are very laid back -- Bryston has just recently changed their signature.  Obviously, the new Bryston amps are out of your budget.

The Emotiva amps are more neutral in comparison, but they are still very fast and engaging.  That being said, I feel that they really need a fuse upgrade because they can be somewhat bright/metallic sounding.  I found an Isoclean fuse will warm up the sound on the Emotiva and smooth out the brightness/harshness a good deal.  Or you could go with Furutech rhodium fuse if you are after deep powerful bass and very high resolution (very revealing).  I have not listened to their "Gen 3" amps as they are a completely different beast (using switching power supply and XPR-based amp boards).

I've heard that NAD amps are very warm and very nice.  There's a dealer demo NAD C275BEE for sale on audiogon for $999 OBO.  It might be somewhat underpowered for your situation though.

This next idea will definitely break your bank, but you could look into a Parasound A21?

jrunr's avatar
jrunr
45 posts
 
What about the older Parasound amps?  The old John Curl designs like the 2205 or HCA-2003A?  What are your thoughts on those?
kalali's avatar
kalali
1,645 posts
 
Don't take this the wrong way but if it were me I would hold off and reevaluate my budget if at all possible, before spending the $1K on something that may not end up being much of an improvement over what I already have. Or at least wait for a great opportunity to come up. The 10Ts deserve (and demand) clean solid power to show what they can really deliver. I've heard them extensively when paired with a pair of McIntosh 601s and they are simply breathtaking.  
jrunr's avatar
jrunr
45 posts
 
What did you decided to do? I'm looking for amps for my Aerial 7b and CC3b as well. 
More to discover