Vishay bought Mills in 2011 and they have been making them ever since, in brown. There were four, color/finish versions of the older, made in the USA, Mills wire wounds: Dull(flat) in either black or brown / shiny and smooth in either black or brown.
Mills MRA two types of different brand ?
there are two types of one brand or the two brands product the same resistor ?
http://www.soniccraft.com/product_info.php/015-ohm-mills-mra-12-p-648
http://www.soniccraft.com/product_info.php/022-ohm-vishay-mills-mra-12-p-4697
i’m confused
http://www.soniccraft.com/product_info.php/015-ohm-mills-mra-12-p-648
http://www.soniccraft.com/product_info.php/022-ohm-vishay-mills-mra-12-p-4697
i’m confused
- ...
- 14 posts total
The older Mills 12w (shiny black) has a bit more detail and has fast, clean high frequencies and is slightly lean in the upper bass although it has tight, powerful deep bass. They also have a slight edginess in the highs. The newer version (dull brown) is warm, not lean, slightly soft and dull, and doesn't have quite as much detail. At least that's how I recall them from a couple years ago. |
i have two types of mills mra12 - the first one is dull brown and marked : "mills 1ohm mra12f 1019" - the second one is shiny brown and marked : "mill mra12 1ohm 1% m1713 mexico" like these: http://www.partsconnexion.com/media/product/resistors/mra12.JPG what is the newer between the two that " is warm, not lean, slightly soft and dull, and doesn’t have quite as much detail " (salectric cit.)? |
- 14 posts total