Horn based loudspeakers why the controversy?

 Just regarding the OP's a post I think Horns are really polarizing because they are like a microscope on the entire chain that lies before them. So if there's anything bad in the chain it really really highlights it. But if everything is good and the horns are good it's really good. 

 Also just regarding atmospheres comments about SET amps and distortion. It's true that they have higher distortion when they are run at anywhere near the rated power but they also have vanishing low distortion if they are run at about 10% of full power. So when you hear them coupled with  horns usually you're not hearing the amps distort.   Solid-state is the opposite at about 10% of its full power it will have quite a bit higher distortion  then the SET amp at 10%. And many people have bass their opinion on horns from the 70s and 80s with crappy higher powered solid-state amps. I don't know why anybody would use that combo but unfortunately lots of people did.

@atmasphere 
Yes. There is the theory and there is the practice. I would also agree with your assessment of distortion and dynamics. I've long said that truly high fidelity allows for listening at very high volume without a sense of real loudness and what you say squares with that. 

The best system I’ve heard Austin Acoustic system they are using Horns....made by Austin Acoustic as well... Dynamic is out of this world? $750k, they were in Chicago Axpona 2017

For the record the quality of the compression driver makes all
The difference in the world . Here us a great example 
Pure Audio Project  open baffle  Horn  model. All these speakers are modular  ,they share 4- 15 inch Emenence drivers, 
There us the Horn , Voxativ full range for mids- highs,Tang Band,
Beyma150,AMT - Heil ,AMT-, you have full control ,as well as the Xover. A interesting take at something different,and you
Put it together.