New Tweak --- Its Fantastic


THE NEW TWEAK

Over the good part of this past year I’ve been beta testing a new tweak, the name of which is "Total Contact." Its a hi-bred graphene contact enhancer that is different from all other contact enhancers that have come and gone for one reason or another. I’m not new to these contact enhancers, having had quite a bit of experience with a product developed by the late Brian Kyle and his "Quick Silver" contact enhancer. The "Total Contact" is different ... a LOT different.

"Total Contact" is graphene based and is not a vibration control. It eliminates micro-arching between two contacts. Micro-arching, much like Micro-vibration smears the sound in our stereo systems. Its the type of distortion that we don’t know is there .... until we eliminate it. There is no break-in as we know it. The sound is improved right off the bat, but what you hear is only a smidgen of what’s to come.

I tested three generations of "TC," each of which was an improvement over the previous incarnation. The final mix was cryogenitically treated and made for a more effective, much smoother application. It comes in a large hypodermic needle type plunger containing 1.5 ml of product and includes a instructional DVD and an application brush.

The application should be applied with a very thin coat to all of your electrical connections .... from your cartridge pins to your power cords. I did my entire system, including the ends of my fuses.

Upon initial application, you will notice an improvement in clarity, correctness of tonal balance and a more overall organic sound. But ... that is just scratching the surface of what this magic paste does. As it cures, the improvements become more apparent. Much more!

There are two real break-through events that happen almost to the day with "Total Contact," one at four weeks and another at eight weeks . At four weeks, you’ll get a real jump in clarity and overall improvement. That’s only a taste though of what’s to come at eight weeks. At eight weeks your system’s focus will make a jump in SQ that is so real - its surreal.

After 40 years in the hobby, and a total tweak nut, I have never heard anything that does what this graphene paste does. The see-through clarity at eight weeks becomes simply amazing. The "paste" eventually cures into a kind of polymer plastic and it seems that the sound improves with each listening session. So, its important that you leave your contacts alone for the duration. If you’re the type of person that continually switches wires in and out, you’ll have to re paste until enough time has elapsed to get "the cure."

The only problem I had was with the first batch and that had to do with shorting out a tube pin in the line stage. Use the "TC" very sparingly on tube pins, if at all. I only had problems with the line stage tube pins. The Amp, CD Player and Phono Stage has had no tube pin problems at all.

Tim Mrock, one of our fellow A’goners, is the developer of the product. Its taken Tim 15 years and several patents to get it right. Tim has "pasted" every electrical contact he can find in his audio system, all of the switches in his circuit breaker box, every contact in his car ... and has used it in commercial applications such as hospital circuit breakers, surgical lights ... and other places where efficiency and long life of electrical components are deemed important.

This product is highly recommended to anyone who truly wants to get the most out of his/her audio systems. There’s enough product in each tube to do at least two audio systems as it just takes a very thin coat on each application to be effective. The last tube was enough to do my system twice and then a friend’s system this past weekend.


Frank

PS: There were a couple of other A’goner beta testers of this product as well. Hopefully, they will chime in here with their experiences for comparison. I "pasted" both of Steve Fleschler’s systems a few days ago, perhaps he will comment on his results too. We forgot to paste Steve’s power cords though, so there’s a lot more to be had from Steve’s two fantastic systems.

Frank
128x128oregonpapa
It’s probably lack of experience that someone would argue that electrical “opens” are the problem, or a problem, since anyone who’s ever used these contact enhancers to any extent, such as your friend and humble scribe, knows they are very conductive and can create shorts when used too aggressively, you know, such as going down too far on tube pins. But not opens. Recall that one issue that Silver, Silver/Gold and graphene contact enhancers address is incomplete contact due to micro imperfection of metal surfaces. I’m not referring to contact cleaners such as Deoxit.

This all just illustrates that pseudo skeptics will think of ridiculous arguments in an attempt to stop the train of progress. 🚂 All aboard! Toot, toot!
oregonpapa
Again, the only time I have ever gone on the offensive here is when I’ve been attacked, or whenever this fine product has been attacked with verbiage like "snake oil." "goop," "scam" ... ect. Other than that, I’m a very mellow guy ...
I'm the guy that first called it "goop" and I really didn't intend it in an negative way, so I'm sorry if anyone thought otherwise. I think the term "snake oil" gets bandied about here much too casually, usually to the discredit of whoever is making the claim. 

@geoffkait

No need to discuss further. Either it is true or it isn’t true that licensed bonded electricians did the work on 35 electrical panels (and documented evidence will be forthcoming on at least a few to confirm). I am confident it is true.

Once proof is provided then we all know that it is safe to use as described and recommended. Without proof ....this is just an Internet forum and anyone can say anything...
@shadorne Whoa! What? If there’s no need to discuss further why are you discussing it further? I’m afraid this is just a simple case of experience trumping navel gazing. Case closed.
@shadorne

Proof? Wow, Tell you what, I have absolutely nothing to prove, especially to you. Questioning my creditably, hinting that I might be a liar.

Electricians? I have had 1 he  has been with me  close to the start of my journey his name is Christopher Roy, licensed Master in both New Hampshire, and Massachusetts. Want his license number then Put the time in to find it.

Second I did a panel service in Connecticut for a prominent reviewer.
Used Herrick Electric, company owners name is Jordan Herrick, ask for him, sure he will provide you with a license number, and info about Tim Mrock. His company is licensed in MA, RI, CT, NY, for anybody living in any of these states, and needs and great honest electric work done.

 Anything else?