Corelli - really????


Hi,
I read the 6 moons review on this but I still have a hard time believing this can improve a system.  Anyone have any experience with these?
https://www.akikoaudio.com/en/products/488-akiko-audio-power-conditioner-corelli-english
anderock
Hi ebm,

There is a very high end turntable company that is located in Memphis TN that has bought several of the Corelli and phono boosters Perhaps you could contact them for a reference.

Merrill Williams Audio LLC

1722 Chelsea Ave.

Memphis, TN 38108

Robert Williams

Telephone 901 237 1654

We have literally sold 100's of the Phono Booster and the Akiko Corelli's but we can not just give out end users email address without their permission..

Depending on where you are located, The Cable Company and Jaguar Audio both carry Akiko products in the US.

As I said previously, I think Audience makes very good conditioners but I do prefer a total passive strip versus Teflon caps with the Corelli. Although both locations would benefit a Corelli, your front end would be the best location, preamp, CD player and turntable location.


I re-read this discussion and comments from the distributor. I went ahead and got a Corelli. Glad I did! As people tried to tell me, multiple AC Enhancers on one line may be excellent but the Corelli by itself is even better. I’m using Akiko’s power cord. I tried a couple of other cords but the Akiko is the best. I’m using a E-Tuning Gold MK II with it which also makes an audible difference. It's on my system page if you care to see it. I put a DIY "tube light" on top of the Corelli to add a little "art" to the black box. ha,ha
@sbayne  Great to hear! I may order their PC to free up one of my PCs.

Recent changes on the power side of the system allowed me to test a different configuration for the Corelli. I finally used my top power cable since I have an extra one available due to replacing separates with an integrated amp. 

Not sure if it is the new config or the PC or a combination of both, but a noticeable improvement in the current setup. 

Once my components are settled and fully run in, I will be able to test placement and PC pairing impact properly and will report back.
 I have 3 dedicated lines. One for my all my digital, another for my subwoofers and the 3rd for analog equipment (Including preamp and tube amps).
 If I was to buy the Akiko Corelli, which dedicated would it work best on?

ozzy