Replacing generic RECEPTACLES


How important is it to replace your generic receptacles with audio grade receptacles . I already replaced my stock power cords to high end Shunyatas. Would it still be necessary to still change my generic receptacles to audio grade? 
128x128Ag insider logo xs@2xtattooedtrackman
czarivey, Did you buy a used home? Or move into a preexisting apartment? I guarantee the duplex outlets there are all old as the building is. No normal person replaces any duplex until they are broken. that usually means the duplex outlets when YOU move in, are already 10 to 40 years old.   When I move into a new apartment, I replace all the outlets with new ones right off. Ditto the light switches.(since I stay more than ten years.. it just makes sense to me.)So generally replacing outlets is more like replacing nearly broken down crap that works, but does so poorly, with something that will work well for years to come.++++++++++++++++++++++++++++++++++++++++++++++++++++TTman.. As for the quad 20 amp circuit. That is all you need, usually. Unless you like to play music at over 100dB (which is really loud)In that case it will not matter anyway, since you will soon be deaf. and the distortion in your ears will mask any in the equipment.
So I am saying you do not need a separate circuit for your CDP, or preamp, or any other equipment.  If you want some improvement, I would suggest getting a small powerline conditioner for your CDP, plugged into the same circuit as the amp.
I have all Shunyata power cords and replaced my audio outlets (on dedicated lines) with the Shunyata 
elizabeth
... 20 amp duplex on 15 amp wires NEC says no. The NEC is not the wire police. They are guides used by electricians as to what they can and cannot do since they are contractors and THEY have legal and liability concerns ... Those concerns are not a law, You cannot go to jail for using a 20 amp duplex on a 15 amp line!
o, you will not go to jail. But in the US, almost all jurisdictions rely primarily on the NEC, so it will be a violation of local code to put a 20A receptacle on a 15A line. That's because the breaker would not reliably trip if the load exceeded 15A. The breaker's primary purpose is to prevent the wire in the wall from overheating.
I do replace bad teeth no snit with good ones, but if a tooth is good, no need for root canal right?
aniwolfe
You can use a 20a receptacle on a 15a line.
Correct. But it's a violation of the NEC and potentially hazardous, because the 15A breaker can 't protect against the potential 20A load, would could cause overheating of the wire inside the wall.