Whizzer cone removal

@fourwnds 

after reading that you are unaware of what 6db means I would not recommend that you cut off the whizzer on any expensive part..  I don't see anywhere about what driver you are using.  It would take some understanding of frequencies and crossover slopes to properly blend parts.  It is even possible that a single cap is completely inappropriate.  

@timlum 
I am using this driver in some of my models. Whizzer cone , read my
previous post is the simple piece of paper  and coudnot play tweeter
role
 

@ the above 2 posters. Let’s see the driver is a HempTone not a particularly exotic single driver or anything. At just about 3k according to the response graph things begin to start to get pretty squirrelly. I feel like there is a pretty seamless blend between the Fountek’s NeoX 2.0 but I’m no expert. The frequency response kicks in @ 1.2khz for the Fountek. Both speakers share same eff. I didn’t want to try anything there as I didn’t want to hear the tweet seperate from main driver but still utilize its goodness. I don’t know, Anyway I thought I start there and change value if it bugged me but shoot my hearing starts to drop off anyway much past 7k and it sounds pretty good. Thanks for your advice. 

@fourwnds  to make shure you do it right , you have to  operate another
tool , like  RTA system  and measuring microphone , it is not break you 
budget, I know you ears is number one , but you can discovery a lot a good helpful things,   

@bache I will look into this, RTA, appreciate it. I guess it's  time to start getting serious about this, by that I mean seriously funner. I hope. Thanks bud.