Outer ring - who uses and what are your findings


Hi. 

I have been thinking about getting an outer ring to help flatten/couple/stabilize my vinyl as it rotates. 

Curious what your experiences have been. 

Thanks!

p
perkri

Hi , I have missed the post , so my addition might be late or redundant.


I do use a outer ring (and try to avoid using a centering spider if possible to keep the routine as simple as I can).
I must say it works to keep records with slight warp flat. But I think there is more to it then that and I have written a document on the subject, presenting my thoughts and followed up with some experiments and experiences.
I prefer to combine the outer ring with an Oracle and SME style of system; screw on clamp with a specially shaped bottom and a washer under the record.
I regard the ring as the next best next thing to vacuum holding of records, which I have to my availability on 2 of my TT's. I have sent my ring to a work shop for slight modification and when returned (taking some time still) I will also use the ring in conjunction with a vacuum platter to see what benefits may still be present.

As an aside; I am not in favor of dished platters/mats because of the variable azimuth that results from it. A clamp without a dished platter cannot, as skilled its design may be, completely flatten a severely warped record. With a straight, flat platter and mat the outer ring will help considerably in reducing warps.

If you would like to read the document on the subject I could send it. I have translated the doc into English, which is not my home language.

Schenk,
I would like to read your paper.  Please send it.  Of course there is more to a periphery ring and clamp, or vacuum system as well, than just flattening out a warped record.  Records vibrate a bit as the stylus travels through the grooves, and these devices help to dampen the micro vibrations that develop in consequence.  How much affect this phenomenon has on the sound we hear coming out of our speakers is subject to a number of variables.  I look forward to learning your thoughts of all that might be involved.
Bill

melm233 posts07-13-2018 10:51amI also have a VPI with an older acrylic-lead platter that I wouldn’t change. So I opted for a 2.5 lb. 3rd party ring. It is a TTW ring; they’re out of business now, but there's still a reasonably priced vendor..
Would you name the aforementioned vendor please?
From what I've read on this post is that most users of clamps like
the effect .
I have an original Merrill Heirloom TT that had many firsts
in the TT design , the ring clamp being one of them .
I have done the with and without the ring clamp 
and I found it to have a positive effect on the sound  
and record flattening works wonders on  the worse of warping .
My clamp weighs  665 grams , I had tried one from Vinyl  Nirvana  
weighing about 325 grams  
( sounded great but didn't do well at flattening warped vinyl ) .
 One post brought up the weight  and the bearing and I agree putting 2.5 or 3 lbs. one a TT that wasn't designed
for one might not be a good idea .
Another post brought up the cost , agreed if you don't have one and your TT wasn't designed for one you might be better off buying a used table with one than buying one , except the one from Vinyl Nirvana
it's a bargain .

If I replace this table my next will either have a ring clamp of it will be vacuum clamped .
Rob



I have moved my document on the subject of an outer ring into dropbox. See attached link towards this doc. I will leave this in place for some time to come.


https://www.dropbox.com/s/vwjpjme720c11dl/MicroSeikiBL91deel3E.pdf?dl=0