HI BIF,
I looked up your amp on the ARC database but no schematic for the 150. Great site for those who are curious about ARC gear. From what you tell me it appears there is only one bias pot per channel. Do you have a schematic for me to look at? I need to know if the driver tube is direct coupled, I do that in the RM-200 and they did in some amps.
I was the first to computer test tube and match them to very tight specs in 1982. I discoverd the Two Point match where once we find the grid volage for a particular current we then find the transconductance. If one matches both of those numbers the tubes will track over a wide range or voltages and currents. Others, as far as I can tell, still set a grid voltage and get a current but they aren't doing what I am doing.
I also test for grid leakage, which is one aspect of what ARC used to call "Low Gas". What they wanted was tubes that didn't run away when they got hot as ARC tubes do..But tubes usually arent Gassy when new, they get gassy from running hot.
On life all I can say is that I consulted with Sylvania Engineers, spend a full day at the plant in Altoona, PA and learned a lot. I was advised that their power tubes can last 10,000 hours if run at 50% of rated dissipation. Its dissipation that kills tubes, makes them gassy and run away. ARC likes to run tubes at high idle currents such as 60-70 MA and at 500 volts thats can be 35 watts which is the max rating for 6550s. Tube life is not linear with dissipation and max rating can reduce life by a factor of 10, so 1000-2000 hours is typical for many amps, though not for my amps which run them at 15 watts in the RM-9.
So it was good for them to go to the KT120 which is rated higher and the KT 150 higher still. Im not sure I agree with those ratings but they certainly are bigger tubes and have a hight dissipation. I would say the KT150 is a bit of overkill but thats what ARC likes to do. While I keep a large stock of KT-120s on hand I have not yet bought a large number of KT150 as they are much more expensive than the 120s. However I think i can beat their price and know I can do better matching if I can get some demand for those tubes. So lets see if that will occurr..
Yes I am indeed Roger A. Modjeski last time I checked :)
I looked up your amp on the ARC database but no schematic for the 150. Great site for those who are curious about ARC gear. From what you tell me it appears there is only one bias pot per channel. Do you have a schematic for me to look at? I need to know if the driver tube is direct coupled, I do that in the RM-200 and they did in some amps.
I was the first to computer test tube and match them to very tight specs in 1982. I discoverd the Two Point match where once we find the grid volage for a particular current we then find the transconductance. If one matches both of those numbers the tubes will track over a wide range or voltages and currents. Others, as far as I can tell, still set a grid voltage and get a current but they aren't doing what I am doing.
I also test for grid leakage, which is one aspect of what ARC used to call "Low Gas". What they wanted was tubes that didn't run away when they got hot as ARC tubes do..But tubes usually arent Gassy when new, they get gassy from running hot.
On life all I can say is that I consulted with Sylvania Engineers, spend a full day at the plant in Altoona, PA and learned a lot. I was advised that their power tubes can last 10,000 hours if run at 50% of rated dissipation. Its dissipation that kills tubes, makes them gassy and run away. ARC likes to run tubes at high idle currents such as 60-70 MA and at 500 volts thats can be 35 watts which is the max rating for 6550s. Tube life is not linear with dissipation and max rating can reduce life by a factor of 10, so 1000-2000 hours is typical for many amps, though not for my amps which run them at 15 watts in the RM-9.
So it was good for them to go to the KT120 which is rated higher and the KT 150 higher still. Im not sure I agree with those ratings but they certainly are bigger tubes and have a hight dissipation. I would say the KT150 is a bit of overkill but thats what ARC likes to do. While I keep a large stock of KT-120s on hand I have not yet bought a large number of KT150 as they are much more expensive than the 120s. However I think i can beat their price and know I can do better matching if I can get some demand for those tubes. So lets see if that will occurr..
Yes I am indeed Roger A. Modjeski last time I checked :)