2. cables
  3. 143523-94588

Bi-Wire with two pairs of speaker cables

Stupid question:

My speakers have dual binding posts, so they can be biwired. Want to try. Currently using single wire speakers with jumpers.

So instead of selling current speaker wire, and buying new biwire set, can I get a second set of single speaker wire, identical to what I have, and run them from my Amp to the second set of binding posts on my speakers? Of course, removing the jumpers. I think I have enough space on Amp to fit a second set of spades
128x128thyname
jb840
1 posts
 
Checke to see if your post on your amp will except both spades as well as banana, this way you can order the next set of cables with bananas.
thyname's avatar
thyname OP
257 posts
 
Unfortunately @jb840 it only accepts spades
bdp24's avatar
bdp24
4,908 posts
 
Bi-amping correctly (with a filter removing the bass from the amp powering the midrange and/or tweeter drivers) requires two pair of cables of course, and some bi-ampers like to use heavy gauge on the woofer, lighter on the m/t’s. Bi-wiring can provide similar (though lesser) improvements, and is what Richard Vandersteen recommends for his loudspeakers. Separating the m/t's from the back-emf sent into the cable from a dynamic woofer is a good thing. Nothing wrong with trying different cables on different drivers. It’s only money ;-) .
wolf_garcia
4,650 posts
 
I had made a pair of AQ Type 8s into a bi-wire cable and that sounded OK, and then ran into Bill Low at a local audio "salon" and he explained to me why his "Rocket" cables might work much better...I bought a pair of the newer version of the Rocket 33s (4 conductors per bi-wire side of each cable run instead of 3) and yeah, he got it right as they're really 2 runs of the same cable, and sound terrific. 
More to discover