My Focal 836v speakers are rated for 40Hz to 28kHz +/- 3dB with the low frequency cut off at 33Hz. I have a test tone CD and verified that they would produce an audible tone at 28Hz with my Integra receiver, but would only do 30Hz with my Onkyo. Having them up against the wall provides bass supported (some might call it bloated), but it works for me the majority of the time. The subwoofer stays off for most critical listening.
Why the obsession with the lowest octave
From what is written in these forums and elsewhere see the following for instance.
Scroll down to the chart showing the even lowest instruments in this example recording rolling off very steeply at 40 Hz.
http://www.homerecordingconnection.com/news.php?action=view_story&id=154
It would appear that there is really very little to be heard between 20 and 40 Hz. Yet having true "full range" speakers is often the test of a great speaker. Does anyone beside me think that there is little to be gained by stretching the speakers bass performance below 30-40 cycles?
My own speakers make no apologies for going down to only 28 Hz and they are big floor standers JM Lab Electra 936s.
Scroll down to the chart showing the even lowest instruments in this example recording rolling off very steeply at 40 Hz.
http://www.homerecordingconnection.com/news.php?action=view_story&id=154
It would appear that there is really very little to be heard between 20 and 40 Hz. Yet having true "full range" speakers is often the test of a great speaker. Does anyone beside me think that there is little to be gained by stretching the speakers bass performance below 30-40 cycles?
My own speakers make no apologies for going down to only 28 Hz and they are big floor standers JM Lab Electra 936s.
- ...
- 130 posts total
- 130 posts total