dCS Puccini Clock


I had yesterday the oportunity to hear for first time the Puccini clock.

I must admit that I was a little sceptical. The system consisted of:

Howland preamp HP-200 SE
Howland amp RADIA SE
Avalon Indra
Transparent power cleaner / station ?
I can't tell which cables

Well the effect is quite amazing and you can easily recognize it in a blind hearing. If I have to describe it I would say, you become aware of the hall / the space in which the recording has been done. The difference is very noticeable when you switch the clock off, suddenly the music sounds dryer, shorter and the space all around the whole music desapears.

I heard:
Luiz Bonfa plays and sing Bossa Nova (Verve)
Bruckner 4th by Jaap van Zweden (bad SACD & interpretation)
Bruckner 4th by Günter Wand (the last recording)
Ports of Call by Eiji Oue (Ref. Rec. bravo Prof. Johnson you are a great sound engeneer!)

One of these days I will take it home and have a test on my system ... and will make some blind hearing with my wife ;-)

I will report then about the experience.
clavil
Clavil - I do not belive different digital cable would make much of a difference. The price I gave you does include $2000 Shunyata Anaconda Helix VX power cord.

I belive the Puccini U-Clock itself is around $4000. I'm not from the US anyway, so this is just rough estimate.
here some british dealer with another opinion

quote: A new clock cable needn't cost a fortune, we get very good results with the MIT AVt1 at £130. However, the differences made by the better cables need to be heard to be believed. The MIT Shotgun digital cable at £599 is a significant improvement on the AVt1, and Oracles (starting at £1,500) are absolutely stunning.

This may be a difficult concept to accept, but no one so far who has heard what these cables do in this context have been anything other than bowled over. END
I have spoken directly with Martin Reynolds about BNC cable, I think they use with MIT Oracle bnc cable. I think this unit is up to fixing clocking errors. IMO, there is no need to apply excessive powercord and BNC cables on U clock. I have a Stereovox XV2 BNC cable and will be using together with its stock powercord. If any change occur, than it means OK. If not, will try with maybe MIT oracle BNC.
If you do get the Oracle BNC, see if they can get you the old one without the useless switch on it as it's cheaper and better performing.
hello to all, just contributing my two cents to this string. i recently bought a puccini and have heard it in two other settings with and without clock. the first time was at a dealer and i did perceive a improvement in body and smoothness with the clock. the quality of this system was in fact so good (isn't this often the case at the dealer!) that it motivated me to buy the puccini in the first place. the second time i heard the clock was in another audiophile's system. in his system i could barely notice the difference. my tentative conclusion is that you need to have everything dialed way up (the dealer used all Valhalla) to get the most of the benefit, and that at this level, other tweaks: upgrading to highest end interconnect, power cord, speaker cables, etc. may provide equal, or greater benefit. I am open to your views....

regarding dealer comments re: clock cable, forgive me for not being surprised that said dealer insists that sonic benefits continue to accrue as cable price goes up (!)