custom made dustcover for Nottingham Spacedeck

I had one custom made at a local plastics shop. Cost me 80.00 and it looks very nice. You might try the phone book to see what's available in your area.

Oz

I just had a custom 22"x18"x10" clear acrylic cover with rounded front and back top seam and cutouts for cables in back, made for my Clearaudio Master Solution for a grand total of $99.00 CDN. It was done by a local Plastics company and they did an excellent job. Check out your local plastics companies. I can send you a pic if you like ... looks great ... and cheap!

I had the dust cover that has been mentioned above from Vinh Vu at Gingko Audio for the Spacedeck I used to own. It was pricey, but it was worth it to me. It is a very well made dust cover that is very attractive. The dust cover I purchased was not hinged.

I made one out of a silk like material from a fabric store, cut to be draped over the entire turntable. They make a glue like materaial that you put on the cut edges to prevent fraying. I use this on both my Spacedeck and Basis turntables and in fact over about every component I own, works great to keep out dust. Cost about 4.00 per SQ yard. This is a very cost effective alternative.

Tap Plastics is correct as mentioned above and they did a fantastic job and for under a $100. Tap Plastics is in California and they will make and ship what ever you want. I just gave the info to another agoner and he lives on the east coast, Tap is making his cover for his Nottingham and will ship it to him. Forget the TT companies or Ginko unless you want to pay a 200% mark up! Here is there phone number (925) 828-7744 or go to there web site www.tapplastics.com