2. analog
  3. 1186001554

"Glue Cleaning" Your LP's

So here's something I heard about and am getting ready to try: "Glue Cleaning." Apparently if you put a thin film of glue on a record and let it dry for a few hours, the glue bonds to every tiny particle deep in the grooves and you can then peel off the entire glue sheet to remove everything it picked up.

It was recommended to use wood glue or Elmer's glue, spreading it with a foam applicator to keep it evenly distributed. I will of course be trying this only with records marked for "experimentation" (a.k.a. records I hate).

Has anyone heard of this technique? Does anyone have any first-hand experience with it?

-Dusty
128x128heyitsmedusty
heyitsmedusty's avatar
heyitsmedusty OP
185 posts
 
Correct. I will only be using things that I am ok with wrecking permanently.

Results so far: there has been some initial success. The real trick is leaving a a little trail of glue off of the record so that when it dries you have a "tag" to pull up off of the record and release the dried glue sheet. It looks like it's really cleaning the records nicely. The surface noise is reduced dramatically. The main issue is making the edges of the glue very solid and even so that it peels off easily.

Any thoughts on this practice?
dweller's avatar
dweller
2,152 posts
 
Didn't someone try this with Silly Putty a few weeks ago?
pawlowski6132
572 posts
 
How do you know all the glue will come off???

Make sure you try it with your MFSL UHQR first.
schipo
1,267 posts
 
I would only try this with an lp you can trash and not care. I personally would stay clear of this technic, and go with the old fashioned lp clearners from vpi.
cableplex
40 posts
 
yes, apparently you're not doing it in a well ventilated area. Haha.

Interesting idea.
More to discover