SOTA Sapphire Turntable setup - how much lead?

Thanks all, especially for the generous offer of the manual. I do have the manual but it does not specify how much lead comes from the factory; it does cover the procedure. Thanks also for your input on the spikes, that seems quite logical. The footers from Mapleshade look pretty neat but pricey; any other suggestions are welcome. When I get my unit back from SOTA I will post comments on the service and also measure the leg bolts (diameter and thread). Thanks again -- hifigeezer

Since your tt is at SOTA, why not have them balance the subchassis? If you know the arm, you should be able to give them the weight. Or you could just weigh the shot you have and tell them the arm & board you are using and they can provide any additional shot you need.

For the best in sound use a reative material such as steel shot or brass. Tom

When in doubt, read the instructions! I found it in the manual, the factory supplied weight is 2 pounds 14.5 ounces. Thanks all.

Thanks to all for your participation. According to two different sources on the web, the leg bolts on the SOTA are 5/16-18. Mine is still in the shop but I will verify it when I get it back. Regards, hifigeezer