Direct drive/rim drive/idler drive vs. belt drive?


O.K. here is one for all the physics majors and engineers.

Does a high mass platter being belt driven offer the same steady inertia/speed as a direct drive or idler drive?
Is the lack of torque in the belt drive motor compensated for by the high mass platter. Object in motion stays in motion etc. Or are there other factors to take into consideration?
I am considering building up a Garrard 301 or Technics SP10, but is it all nonsense about the advantage of torque.
I am aware that the plinths on these tables can make a huge difference, I've got that covered.
My other options would be SME20 or Basis 2500 of Kuzma Stogi Reference etc.
If I have misstated some technical word, please avert your eyes. I don't want a lecture on semantics, I think everyone knows what I mean.
Thanks in advance.
mrmatt
Maybe some Teres or VPI guys who participated in this will chime in.

I'm not a "Teres or VPI guy" but I play one on TV, and I already chimed in above on that very topic. Peter used to be a Teres guy and he heard that demo too. As you know, he's been replaced his Teres and has become one of those Technics Guys. Or is it, once a Teres guy, always a Teres guy? Or maybe once you've had Technics you can't ever go back?
Albertporter
thanks for at least questioning, that dynamics are not quite the same a colouration.
I yet have to hear a system sounding more on-the-point/dynamic as is with a 'harder' connected drive, by simply using a different platter or platter-mat.
That's wishful thinking to me.
It can sound 'cleaner' and may leave this impression? But lack of 'slam' and 'drive' is more related to the drive then a platter-mat, in my current experience.
"But lack of 'slam' and 'drive' is more related to the drive then a platter-mat, in my current experience."

Totally agree.

I can't seem to understand how a platter mat can improve dynamics, slam, and "drive". No matter what mat I put on my Empire or other belt-drive systems, it aint sounding like my Technics SP10. I have smoother sounding DD tables than the Technics but none can surpass the bass dynamic and slam of the SP10 due its powerful motor. I also played with an idler table with an Ashland motor and it has huge dynamic. Again, the motor. From my experience is that small motor small dynamic and if it's a belt-drive even worse, the Nottingham is one example. I do believe changing mats can change the sound and the extra mass sometimes helps smoother rotation but the sonic benefit, if any, is more of a tonal one and signal to noise issue. Again, that's just my current experience. I would love to try some TTWeight mats.

I am, I guess, a "Technics guy" for 20 years. Briefly, I circumstantially became an Empire guy. I missed direct-drive so now I am back to be a Technics guy again, with a vengeance and end up with dozen other direct-drive tables. It's been fun.

While it has been several years I do remember hearing a demo of the prototype Teres Certus. I recall that there was/is a difference between the Certus platter and that used on the non-DD Teres tables. One of the differences was the use of a significant amount of brass. This was on my mind during that demo. How much of the presentation was due to the drive and how much was due to the difference in platter material? I suspect a bit of both, and I do believe that there were differences in arm/carts. To Ralph's point, the surfaces were the same as far as I know.

I don't know if the present Certus controller offers the torque adjust feature that was on the proto. That adjustment did make for an effective demonstration of the effect of torque on the sound. At one point the torque was turned up such that the sound changed immediately from analog to digital.

Since that time I've never stopped wondering if the transient sounds I'm hearing are real or not when I am experimenting with speed. I posted earlier about my experiments with really taught mylar and a more robust controller. At present I am drawn to the sound, but my mind still asks if it sounds real.

As interesting as this all is, I feel the need to remind myself that not everyone agrees with what I think LP playback should sound like. There are many people in this hobby that prefer what I would call sluggish and syrupy presentation.
One other thing I wanted to add was with respect to what can perceived as a cartridge alignment issue, which in reality is actually a micro-dynamic speed issue. I don't know what other term to use to refer to this, hopefully you guys can get a hint of what I'm on about. I would guess this is probably more prevalent with belt drives.