2. analog
  3. 1354259910

Which tonearm for vintage Micro Seiki BL-91

I have "upgraded" from a vintage Micro Seiki BL-51 to a vintage (again)BL-91 (checked by the local Hi-Fi shop). Unlike the BL-51 that came with a hard wired original tonearm this BL-91 comes without any tonearm.
Could someone recomend me a good tonearm for this turntable. I'm wondering if modern tonearms like the Kuzma 4 point ( have an offer for a second hand one), SME V (or IV-VI), Schick Tonearm, or TriPlanar would be a good match or should I rather go to the older ( and less expensive) designs like the Saec 407/23, Micro Seiki MA-505 Fidelity research FR-64S).
I have a Miyajima Shilabe that I bougth second hand here on Audiogon. Sounds very "organic" meaty full bodied and that is what I like.
Does someone have experience in using recent desings on older turntables?
Thanks in advance
Enjoy the music this weekend
Tony
128x128tgaral
bpoletti
1,004 posts
 
The MA-505 should provide a very good level of performance. I was very please with mine (on a modified TNT) before I switched to a VPI JMW-12 (on an Aries 1 extended).
tgaral's avatar
tgaral OP
17 posts
 
thanks for your response I read somewhere that the MA-505 would have a slightly more narrow soundstage than its competitors of that period? what was your experience with it and how does teh VPI JMW-12 compare to the Micro Seiki.
br3098
660 posts
 
I have to agree with Bpoletti, the MA-505 is probably the best overall match for this deck; the MkII for "standard" cartridges or the MkIII version if you want to use a high compliance cartridge. The BL-91 is a little resonant, so IMO a dynamically balanced tonearm will work better than a static arm. Also, in order to mount a VPI arm you are going to have to drill a blank mounting plate. The geometry of the deck will limit you to a 10" or (possibly) a 10.5" arm.

I have setup many MA-505s, and if you take care to match the right cartridge and take a little time to set up the arm properly these tonearms can really sing. I have had very good luck with either the Benz Ace and Glider LOMC carts with the MA-505 MkII, but there are several other cartridges that will work well with this arm.
More to discover