To those with multiple tables/arms/cartridges


How do you 'play' your system?
For 30 years I had only one turntable, one arm and one cartridge......and it never entered my mind that there was an alternative?
After upgrading my turntable nearly 5 years ago to a Raven AC-3 which allowed easy mounting of up to four tonearms......I decided to add two arms.
RAVEN
A few years later I became interested in Direct Drive turntables and purchased a vintage 30 year old Victor/JVC TT-81 followed shortly after by the top-of-the-line TT-101 and I designed and had cast 3 solid bronze armpods which I had lacquered in gloss black.
TT-101
By this time I had over 30 cartridges (both LOMCs and MMs) all mounted in their own headshells for easy interchange.
STORAGE

Every day I listen to vinyl for 3-4 hours and might play with one cartridge on one arm on one table for this whole day or even two or three days.
I then might decide to change to a different arm and cartridge on a the same table or perhaps the other.....and listen to the last side I had just heard on the previous play.
I am invariably thrilled and excited by the small differences in presentation I am able to hear....and I perhaps listen to this combination for the next few days before again lusting after a particular arm or cartridge change?

Is this the way most of you with multiple cartridges/arms listen?......or are there other intentions involved?
128x128halcro
Dear Lew,

As this Thread is about turntables, arms and cartridges......pretty much anything analogue is relevant :-)

What great news about your procurement of the TT-101 Clock ICs.
Perhaps your tenacity will allow you to be the saviour of many of the 'non-working' TT-101s in existence?
Can't wait for the progress reports?
Hi Halco,

"However it's still a little tricky to follow the system to get them on this Forum?
I've been trying to teach Thuchan for 3 years now.....but even he has given up? :-)"

THREE YEARS, I might be dead by then!

Regards,
Don
To all,

Thanks to my friend and comrade Nikola, I am now a 3 table owner. Actually the 2nd table is to be "put down in the the basement" as my comrade suggested. It is the UA-7045 arm and a TT-81 table. Let the party begin!
Manitunc& Halcro, The obvious and precarious question related to our 'sound memory' is : if one can't hear the difference after, say, one hour , why bother? Anyway one can reach huge savings if this argument is, uh, sound.
Don, If you are like me, you owe your lust for a Victor turntable to Halcro. At least I do. I recently bought a QL10 (TT101 in plinth cum UA7045 tonearm). It was initially not working, and I bought it in full knowledge that it was "broken", but today in the hands of Bill Thalmann, it works!!! Neither Bill nor I know why.

I think I am going to try the plinth-minimus approach with this one. It is well suited for that.