Sakura Systems OTA Cable Kit

Nice to see that the forums are back.

Has anyone tried this cable from a pickup arm to phono stage ? I'm tempted to internally rewire my Ittok, but I thought I would test the water first.

Thanks.

Hi,

4708 OTA is too thick and too inflexible for internal tonearm rewire. Eh, I wish it could run from cart to phono preamp... :-)

My suggestion would be either to get a single run of a good tonearm wire and have it run all the way to phono preamp from the cart or to use the tonearm wire through armtube and to have OTA take the rest of the way from the arm to the preamp. If so, particularly if using LP12, make sure to have the wires together with some plastic string as it will make the P-clip dressing much more comfortable experience.

Best,
Sead

No, Gaincard doesn't have to be used with 4708 OTA Cable kit. I think this became obvious for everyone glancing through numerous reviews where reviewers wouldn't use it even if strongly suggested as a far better solution from what they've been using.

What you have to take care about when using other cables is:
- you can't have bannana speaker connectors connected to gaincard's output terminals. Spades are ok, although some of those monster spades tend to ask for a wider head screw as replacement for the stock ones.
- female RCA connectors on all of 47Labs gear are gentle. As with other gentle things in life, you don't treat them with a brute force. overtightening of the macho-type male connectors may damage chasis RCA connectors. btw, they are made that way on purpose.
- very thick and heavy cables can affect mechanical properties of the Gaincard (and they are important for the sound!)

I can see no reason for having S version connected with Coincident speakers. What I would do, if I were you is to go back and have a listen of:

a) 25w Gaincard and two 25w Power Humpty
b) 25w Gaincard and ONE 50w Power Humpty

You may end up with a better result and some money left in your pocket.

As a starting point, my advice would be to stick to 4708 OTA Kit and only after growing up with Gaincard for a while to investigate other cable options. Or, alternatively, just keep the cables you have (unless they are really completely incompatible ones) and look for new cables after a few months. By no mean it is carved in stone that everyone must use 47Labs cables. Some of us just like them.

Best regards,
Sead

I think you should try the OTA speaker cables with the Gaincard. Very soon they will tell you the truth: every, I mean EVERY other speaker cable manipulates with music.
Than, you could try the OTA cables as IC's....

Hi Ivo,

I thought you went for vacation?
Funny, we live like two blocks away from each other and we meet here. :-))
My point was that Gaincard will work with other cables as well. Possibility is that most of these cables may do injustice to it but I have no problem with that, as long as Gaincard is not accused for revealing some nastiness in the rest of the setup (and funny how people easily jump on accusing Gaincard - if revealing is the crime, yeah, let someone bring the rope, the bastard amp must hang! Dunno, must be something in the size of it... and they say size doesn't matter... hmm.)
Now, having lots of people using OTA these days in non-47Labs setups, it is kind of unusual to look for something else for Gaincard. Still, we both remember well that you were not unhappy initially using Yamamura as IC with Gaincard and that it took me quite some time until I had you let 47 cable properly burn in and realise its full potential as IC.

Best,
Sead

p.s. One of my former dealers used to hold a weight on Gaincard, claiming it sounded better taht way. I really couldn't do anything about it.... except to take him off the dealers list. :-)